Convertible staircase lift

The present work investigates the design and analysis of a staircase lift, which can be used as a Material Handling System. A staircase lift is a mechanical device for lifting people and wheelchairs up and down the stairs, who may find difficulty in doing so themselves. For sufficiently wide stairs, a rail is mounted to the treads of the stairs. A chair or lifting platform is attached to the rail. A person on the chair or platform is lifted as the chair or platform moves along the rail, old age and goods are to be carried across the staircase. A staircase lift is a type of lift that can be mounted on the staircase without altering civil structure. Not only altering, but the person need not change the seat from the wheelchair to the staircase lift, there is a foldable supporting rod for the staircase lift which directly attaches to the wheelchair. This lift runs on electric power and consists of a motor, reduction gearbox, rope drive, two rails and a sliding chair. In this system, we use a DC motor for changing the polarity of the power supply which will make the motor run in reverse direction. Advantages over the conventional hydraulic lift are no civil structure and alteration is required, low cost, less bulkiness, less power, less maintenance required. Easy design, easy installations can be of industrial use too. Moreover, considering some drawbacks due to weight carrying capacity completely depends upon the capacity of the motor. There is a lot of scope for further modification in the project as using a monorail instead of two, using a belt drive or chain drive instead of a rope drive. Incorporation and automation/timer unit will ease the use of the device. Rack and carrier arrangement for using the device for a curved staircase and use of work & roller reduction gear assembly.