Use of Axle Load Spectra (ALS) for Estimating Calibration Drift in Weigh-In-Motion (WIM) Systems

The road agencies collect and submit weigh-in-motion (WIM) data to the Federal Highway Administration as part of their traffic monitoring program. Therefore, the WIM data should be precise and accurate. One way to evaluate WIM measurement errors is by using the test truck data collected immediately before and after equipment calibration. The limitation of this approach is that the data represent a snapshot in time and may not represent a long-term WIM site performance. This paper presents an approach for estimating WIM system accuracy based on axle load spectra attributes (normalized axle load spectra (NALS) shape factors). This alternative approach allows for characterizing temporal changes in WIM data consistency. The WIM error data collected before and after calibration were related to Class 9 NALS shape factors in the proposed methodology. This paper aims to determine WIM system errors based on axle loading without physically performing WIM equipment performance validation using test trucks. The presented methodology can be used to estimate systematic errors (drift) in the WIM system at any point in time after the equipment calibration. This approach can help highway agencies select optimum timings for routine maintenance and calibration of WIM equipment without compromising its accuracy. The results show that the WIM accuracy for the single axle (SA) and tandem axle (TA) can be estimated with SA and TA NALS shape factors with an acceptable degree of error for bending plate to quartz piezo sensors. Examples are included to demonstrate the application and significance of the developed models.