Photocatalytic Performance of Boron-Doped TiO2 for Treatment of Rhodamine-B Dye and Industrial Wastewater Under Ultraviolet Irradiation

The organic dyes that have been added to water by various industrial effluents possess a serious threat to the environment due to their mutagenic character. TiO2 has been widely employed as a photocatalysis for the degradation of these dyes. However, a non-metal doped TiO2 can be a promising candidate for the advanced treatment of industrial wastewater containing organic dyes. In this work, we have prepared and tested different boron-doped TiO2 photocatalysts to examine the effect of boron addition on the photocatalytic activity of TiO2. The various boron precursors used are boric acid (BA), boron oxide (BO), and boron nitride (BN), through which Boron is formulated and is doped through a single-step sol-gel method. The prepared nanocomposites are characterized using various characterization techniques, such as Field Emission Scanning Electron Microscopy (FESEM), Transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) and Raman spectroscopy, X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy, photoluminescence, and X-ray Photoelectron Spectroscopy (XPS) analysis. UV light of wavelength 365 nm has been used for studying the photocatalyst behavior. Both rhodamine-B (RhB) and industrial wastewater samples have been studied for degradation kinetics. The boron-doped TiO2 nanocomposites show a high level of dye degradation (>95%) with RhB dye and (>63%) with industrial wastewater samples. Further, TiO2-BA composites in both the cases showed maximum dye degradation compared with other boron nanocomposites with an enhancement in the efficiency of (>13%) over a pure phase of TiO2.