蓖麻木材径向裂纹及树脂浸渍改性对其尺寸稳定性的改善

IF 2.2 3区 农林科学 Q2 FORESTRY
Holzforschung Pub Date : 2023-11-14 DOI:10.1515/hf-2023-0073
Surong Meng, Yingying Su, Anmin Huang, Bailing Sun
{"title":"蓖麻木材径向裂纹及树脂浸渍改性对其尺寸稳定性的改善","authors":"Surong Meng, Yingying Su, Anmin Huang, Bailing Sun","doi":"10.1515/hf-2023-0073","DOIUrl":null,"url":null,"abstract":"Abstract This study investigated the characteristics of radial cracks in Castanopsis hystrix wood and evaluated its dimensional stability after impregnation with low-molecular-weight polyacrylate (PA), melamine-urea-glyoxal (MUG), and melamine-urea-formaldehyde (MUF) resins. The physical properties were examined by dimensional stability measurements, dynamic vapor sorption (DVS) analysis, and scanning electron microscopy (SEM). The results showed that radial cracks were easily produced in the transverse section of untreated wood during drying. The surfaces of the radial cracks exhibited an even and clean structure without fluffs on the pair of surfaces, and cracks spanned 4–5 annual rings. The resin-impregnated wood showed no radial cracks on its transverse surface. C. hystrix wood modified with MUG and MUF exhibited a higher weight percentage gain (WPG) than wood modified with the same concentration of PA resin. The resin-impregnated C. hystrix wood also showed reduced anisotropy and improved dimensional stability. The SEM images of the modified wood showed that the wood pits and cells were filled with resin, while the cell wall surfaces were covered with a layer of resin.","PeriodicalId":13083,"journal":{"name":"Holzforschung","volume":"87 18","pages":"0"},"PeriodicalIF":2.2000,"publicationDate":"2023-11-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Radial cracks in <i>Castanopsis hystrix</i> wood and its dimensional stability improvement by resin-impregnated modification\",\"authors\":\"Surong Meng, Yingying Su, Anmin Huang, Bailing Sun\",\"doi\":\"10.1515/hf-2023-0073\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract This study investigated the characteristics of radial cracks in Castanopsis hystrix wood and evaluated its dimensional stability after impregnation with low-molecular-weight polyacrylate (PA), melamine-urea-glyoxal (MUG), and melamine-urea-formaldehyde (MUF) resins. The physical properties were examined by dimensional stability measurements, dynamic vapor sorption (DVS) analysis, and scanning electron microscopy (SEM). The results showed that radial cracks were easily produced in the transverse section of untreated wood during drying. The surfaces of the radial cracks exhibited an even and clean structure without fluffs on the pair of surfaces, and cracks spanned 4–5 annual rings. The resin-impregnated wood showed no radial cracks on its transverse surface. C. hystrix wood modified with MUG and MUF exhibited a higher weight percentage gain (WPG) than wood modified with the same concentration of PA resin. The resin-impregnated C. hystrix wood also showed reduced anisotropy and improved dimensional stability. The SEM images of the modified wood showed that the wood pits and cells were filled with resin, while the cell wall surfaces were covered with a layer of resin.\",\"PeriodicalId\":13083,\"journal\":{\"name\":\"Holzforschung\",\"volume\":\"87 18\",\"pages\":\"0\"},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2023-11-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Holzforschung\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1515/hf-2023-0073\",\"RegionNum\":3,\"RegionCategory\":\"农林科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"FORESTRY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Holzforschung","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1515/hf-2023-0073","RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"FORESTRY","Score":null,"Total":0}
引用次数: 0

摘要

摘要研究了桃壳栲木材径向裂纹的特征,并评价了低分子聚丙烯酸酯(PA)、三聚氰胺-尿素-乙二醛(MUG)和三聚氰胺-尿素-甲醛(MUF)树脂浸渍后桃壳栎木材的尺寸稳定性。通过尺寸稳定性测量、动态蒸气吸收(DVS)分析和扫描电子显微镜(SEM)检查了其物理性质。结果表明:未经处理的木材在干燥过程中,其横截面容易产生径向裂纹;径向裂纹表面结构均匀干净,对表面无绒毛,裂纹跨越4 ~ 5年轮。树脂浸渍木材的横向表面无径向裂纹。与相同浓度的PA树脂改性的木材相比,用MUG和MUF改性的木材具有更高的增重百分比(WPG)。树脂浸渍后的木丝各向异性降低,尺寸稳定性提高。改性木材的SEM图像显示,木坑和细胞被树脂填充,细胞壁表面覆盖了一层树脂。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Radial cracks in Castanopsis hystrix wood and its dimensional stability improvement by resin-impregnated modification
Abstract This study investigated the characteristics of radial cracks in Castanopsis hystrix wood and evaluated its dimensional stability after impregnation with low-molecular-weight polyacrylate (PA), melamine-urea-glyoxal (MUG), and melamine-urea-formaldehyde (MUF) resins. The physical properties were examined by dimensional stability measurements, dynamic vapor sorption (DVS) analysis, and scanning electron microscopy (SEM). The results showed that radial cracks were easily produced in the transverse section of untreated wood during drying. The surfaces of the radial cracks exhibited an even and clean structure without fluffs on the pair of surfaces, and cracks spanned 4–5 annual rings. The resin-impregnated wood showed no radial cracks on its transverse surface. C. hystrix wood modified with MUG and MUF exhibited a higher weight percentage gain (WPG) than wood modified with the same concentration of PA resin. The resin-impregnated C. hystrix wood also showed reduced anisotropy and improved dimensional stability. The SEM images of the modified wood showed that the wood pits and cells were filled with resin, while the cell wall surfaces were covered with a layer of resin.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Holzforschung
Holzforschung 工程技术-材料科学:纸与木材
CiteScore
4.60
自引率
4.20%
发文量
83
审稿时长
3.3 months
期刊介绍: Holzforschung is an international scholarly journal that publishes cutting-edge research on the biology, chemistry, physics and technology of wood and wood components. High quality papers about biotechnology and tree genetics are also welcome. Rated year after year as one of the top scientific journals in the category of Pulp and Paper (ISI Journal Citation Index), Holzforschung represents innovative, high quality basic and applied research. The German title reflects the journal''s origins in a long scientific tradition, but all articles are published in English to stimulate and promote cooperation between experts all over the world. Ahead-of-print publishing ensures fastest possible knowledge transfer.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信