使用WR28 5端口结进行KA频段(26.5-40.0 GHz)的时域测量

25th ARFTG Conference Digest Pub Date : 1985-06-01 DOI:10.1109/ARFTG.1985.323638

G. Riblet

{"title":"使用WR28 5端口结进行KA频段(26.5-40.0 GHz)的时域测量","authors":"G. Riblet","doi":"10.1109/ARFTG.1985.323638","DOIUrl":null,"url":null,"abstract":"This paper describes the use of a WR28 5 port junction to make time domain measurements in Ka band (26.5 - 40.0 GHz) via the 6-port measurement technique. A solid state signal generator, with about one milliwatt of output power, is used as the signal source. Results on the time domain analysis of narrow height WR28 mismatch standards open at the ends are presented. The two reflections from the junction where the waveguide height narrows, and from the open end are well separated.","PeriodicalId":101637,"journal":{"name":"25th ARFTG Conference Digest","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1985-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Time Domain Measurements in KA Band (26.5-40.0 GHz) Using a WR28 5 Port Junction\",\"authors\":\"G. Riblet\",\"doi\":\"10.1109/ARFTG.1985.323638\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper describes the use of a WR28 5 port junction to make time domain measurements in Ka band (26.5 - 40.0 GHz) via the 6-port measurement technique. A solid state signal generator, with about one milliwatt of output power, is used as the signal source. Results on the time domain analysis of narrow height WR28 mismatch standards open at the ends are presented. The two reflections from the junction where the waveguide height narrows, and from the open end are well separated.\",\"PeriodicalId\":101637,\"journal\":{\"name\":\"25th ARFTG Conference Digest\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1985-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"25th ARFTG Conference Digest\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ARFTG.1985.323638\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"25th ARFTG Conference Digest","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ARFTG.1985.323638","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

本文描述了使用WR28 5端口结，通过6端口测量技术在Ka频段(26.5 - 40.0 GHz)进行时域测量。采用输出功率约为1毫瓦的固态信号发生器作为信号源。给出了两端打开的窄高度WR28错配标准的时域分析结果。来自波导高度变窄处的结和来自开放端的两个反射被很好地分离。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Time Domain Measurements in KA Band (26.5-40.0 GHz) Using a WR28 5 Port Junction

This paper describes the use of a WR28 5 port junction to make time domain measurements in Ka band (26.5 - 40.0 GHz) via the 6-port measurement technique. A solid state signal generator, with about one milliwatt of output power, is used as the signal source. Results on the time domain analysis of narrow height WR28 mismatch standards open at the ends are presented. The two reflections from the junction where the waveguide height narrows, and from the open end are well separated.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

25th ARFTG Conference Digest

自引率

0.00%

发文量