M. Shah, M. Rose, M. Kadir, D. Misman, M. Aziz, M. K. Suaidi
{"title":"双极化插入馈电微带贴片天线","authors":"M. Shah, M. Rose, M. Kadir, D. Misman, M. Aziz, M. K. Suaidi","doi":"10.1109/APACE.2007.4603950","DOIUrl":null,"url":null,"abstract":"This paper present 3 design of array antenna from type of inset-fed microstrip patch antenna located at 45deg and -45deg and capable to generate dual-polarization radiation pattern. Combinations of two patches using quarter-wave impedance matching technique have been used to design the array antenna operate at 2.4 GHz with return loss (RL) less than -10 dB. Those design were simulated using Microwave Office 2006 and were fabricated on FR4 substrate with a dielectric constant epsivr = 4.7, tan sigma = 0.019 and thickness =1.6 mm. Data analysis also has been done to compare the results between simulation and measurement. The result showed that the combination of more patches in array antenna can improve the RL. The prototype of 3 design 1times2 array antenna yields a bandwidth of 5%, HPBW for single element found at 90.07deg-89.75deg and HPBW for array antenna found at 84.68deg-79.05deg.","PeriodicalId":356424,"journal":{"name":"2007 Asia-Pacific Conference on Applied Electromagnetics","volume":"226 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2007-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":"{\"title\":\"Dual polarization inset-fed microstrip patch antenna\",\"authors\":\"M. Shah, M. Rose, M. Kadir, D. Misman, M. Aziz, M. K. Suaidi\",\"doi\":\"10.1109/APACE.2007.4603950\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper present 3 design of array antenna from type of inset-fed microstrip patch antenna located at 45deg and -45deg and capable to generate dual-polarization radiation pattern. Combinations of two patches using quarter-wave impedance matching technique have been used to design the array antenna operate at 2.4 GHz with return loss (RL) less than -10 dB. Those design were simulated using Microwave Office 2006 and were fabricated on FR4 substrate with a dielectric constant epsivr = 4.7, tan sigma = 0.019 and thickness =1.6 mm. Data analysis also has been done to compare the results between simulation and measurement. The result showed that the combination of more patches in array antenna can improve the RL. The prototype of 3 design 1times2 array antenna yields a bandwidth of 5%, HPBW for single element found at 90.07deg-89.75deg and HPBW for array antenna found at 84.68deg-79.05deg.\",\"PeriodicalId\":356424,\"journal\":{\"name\":\"2007 Asia-Pacific Conference on Applied Electromagnetics\",\"volume\":\"226 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2007-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"4\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2007 Asia-Pacific Conference on Applied Electromagnetics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/APACE.2007.4603950\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2007 Asia-Pacific Conference on Applied Electromagnetics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/APACE.2007.4603950","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 4
摘要
本文从45°和-45°插入馈电微带贴片天线两种角度,提出了三种阵列天线的设计方案,能够产生双极化辐射方向图。利用四分之一波阻抗匹配技术将两个贴片组合在一起,设计出了工作在2.4 GHz、回波损耗小于-10 dB的阵列天线。采用微波办公软件进行了仿真,并在介电常数epsivr = 4.7, tan sigma = 0.019,厚度=1.6 mm的FR4衬底上进行了制备。并进行了数据分析,比较了仿真结果和实测结果。结果表明,在阵列天线中加入更多的贴片可以提高RL。3设计1times2阵列天线的原型产生5%的带宽,单元件的HPBW在90.07度-89.75度,阵列天线的HPBW在84.68度-79.05度。
This paper present 3 design of array antenna from type of inset-fed microstrip patch antenna located at 45deg and -45deg and capable to generate dual-polarization radiation pattern. Combinations of two patches using quarter-wave impedance matching technique have been used to design the array antenna operate at 2.4 GHz with return loss (RL) less than -10 dB. Those design were simulated using Microwave Office 2006 and were fabricated on FR4 substrate with a dielectric constant epsivr = 4.7, tan sigma = 0.019 and thickness =1.6 mm. Data analysis also has been done to compare the results between simulation and measurement. The result showed that the combination of more patches in array antenna can improve the RL. The prototype of 3 design 1times2 array antenna yields a bandwidth of 5%, HPBW for single element found at 90.07deg-89.75deg and HPBW for array antenna found at 84.68deg-79.05deg.