基于PSCAD/EMTDC的光伏模块MPPT控制器建模与设计

2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe) Pub Date : 2010-11-18 DOI:10.1109/ISGTEUROPE.2010.5638880

Rajesh Gupta, G. Gupta, Dharmendra Kastwar, A. Hussain, Hars Ranjan

{"title":"基于PSCAD/EMTDC的光伏模块MPPT控制器建模与设计","authors":"Rajesh Gupta, G. Gupta, Dharmendra Kastwar, A. Hussain, Hars Ranjan","doi":"10.1109/ISGTEUROPE.2010.5638880","DOIUrl":null,"url":null,"abstract":"This paper presents a modeling of photovoltaic (PV) module in PSCAD/EMTDC and design of maximum power point tracking (MPPT) using boost converter. The model can be used for simulation studies of grid interface applications using voltage source converter in the PSCAD. The validity of the PV model developed has been verified using the set of data collected experimentally. In order to extract maximum power from the PV module the boost converter can be controlled through the Hill Top algorithm. All the simulation study has been done in the PSCAD/EMTDC simulation software.","PeriodicalId":267185,"journal":{"name":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2010-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"40","resultStr":"{\"title\":\"Modeling and design of MPPT controller for a PV module using PSCAD/EMTDC\",\"authors\":\"Rajesh Gupta, G. Gupta, Dharmendra Kastwar, A. Hussain, Hars Ranjan\",\"doi\":\"10.1109/ISGTEUROPE.2010.5638880\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a modeling of photovoltaic (PV) module in PSCAD/EMTDC and design of maximum power point tracking (MPPT) using boost converter. The model can be used for simulation studies of grid interface applications using voltage source converter in the PSCAD. The validity of the PV model developed has been verified using the set of data collected experimentally. In order to extract maximum power from the PV module the boost converter can be controlled through the Hill Top algorithm. All the simulation study has been done in the PSCAD/EMTDC simulation software.\",\"PeriodicalId\":267185,\"journal\":{\"name\":\"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-11-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"40\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ISGTEUROPE.2010.5638880\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISGTEUROPE.2010.5638880","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 40

摘要

提出了PSCAD/EMTDC中光伏模块的建模方法，并利用升压变换器设计了最大功率点跟踪(MPPT)。该模型可用于PSCAD中使用电压源变换器的网格接口应用的仿真研究。利用实验数据验证了所建立的PV模型的有效性。为了从光伏组件中提取最大功率，可以通过Hill Top算法控制升压变换器。所有仿真研究均在PSCAD/EMTDC仿真软件中完成。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Modeling and design of MPPT controller for a PV module using PSCAD/EMTDC

This paper presents a modeling of photovoltaic (PV) module in PSCAD/EMTDC and design of maximum power point tracking (MPPT) using boost converter. The model can be used for simulation studies of grid interface applications using voltage source converter in the PSCAD. The validity of the PV model developed has been verified using the set of data collected experimentally. In order to extract maximum power from the PV module the boost converter can be controlled through the Hill Top algorithm. All the simulation study has been done in the PSCAD/EMTDC simulation software.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe)

自引率

0.00%

发文量