{"title":"基于EHF自发电机的汽车制动系统监测装置","authors":"S. Votoropin, V.P. Yurchakov","doi":"10.1109/CRMICO.2000.1256241","DOIUrl":null,"url":null,"abstract":"The results of research and development of the test sample of a radio-wave device for vehicle movement parameters monitoring are summarized in this report. The device has been designed for the quick and precise control of a vehicle brake system in stationary (at car repair stations, automobile factories) as well as in road conditions. The autonomous device consists of a portable receiving-transmitting three-beam monounit, brake pedal pressure sensor and a central unit, The radar monounit is based on the autodyne receiving-transmitting modules which are connected with three antennas. Each of the antennas has a 60/spl deg/-slope to the underlying surface and the second antenna is turned by 35/spl deg/ from the plane passing through the first and the third antennas. The aperture diameter of each antenna is 50 mm. The device is used as follows: the pressure sensor is fastened to a brake pedal, the three-beam autodyne radio-locator monounit is hitched to the side surface of the vehicle body by means of a magnetic system.","PeriodicalId":387003,"journal":{"name":"2000 10th International Crimean Microwave Conference. \"Microwave and Telecommunication Technology\". Conference Proceedings (IEEE Cat. No.00EX415)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2000-09-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Automobile brake system monitoring device based on EHF autodyne generators\",\"authors\":\"S. Votoropin, V.P. Yurchakov\",\"doi\":\"10.1109/CRMICO.2000.1256241\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The results of research and development of the test sample of a radio-wave device for vehicle movement parameters monitoring are summarized in this report. The device has been designed for the quick and precise control of a vehicle brake system in stationary (at car repair stations, automobile factories) as well as in road conditions. The autonomous device consists of a portable receiving-transmitting three-beam monounit, brake pedal pressure sensor and a central unit, The radar monounit is based on the autodyne receiving-transmitting modules which are connected with three antennas. Each of the antennas has a 60/spl deg/-slope to the underlying surface and the second antenna is turned by 35/spl deg/ from the plane passing through the first and the third antennas. The aperture diameter of each antenna is 50 mm. The device is used as follows: the pressure sensor is fastened to a brake pedal, the three-beam autodyne radio-locator monounit is hitched to the side surface of the vehicle body by means of a magnetic system.\",\"PeriodicalId\":387003,\"journal\":{\"name\":\"2000 10th International Crimean Microwave Conference. \\\"Microwave and Telecommunication Technology\\\". Conference Proceedings (IEEE Cat. No.00EX415)\",\"volume\":\"20 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2000-09-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2000 10th International Crimean Microwave Conference. \\\"Microwave and Telecommunication Technology\\\". Conference Proceedings (IEEE Cat. No.00EX415)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CRMICO.2000.1256241\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2000 10th International Crimean Microwave Conference. \"Microwave and Telecommunication Technology\". Conference Proceedings (IEEE Cat. No.00EX415)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CRMICO.2000.1256241","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Automobile brake system monitoring device based on EHF autodyne generators
The results of research and development of the test sample of a radio-wave device for vehicle movement parameters monitoring are summarized in this report. The device has been designed for the quick and precise control of a vehicle brake system in stationary (at car repair stations, automobile factories) as well as in road conditions. The autonomous device consists of a portable receiving-transmitting three-beam monounit, brake pedal pressure sensor and a central unit, The radar monounit is based on the autodyne receiving-transmitting modules which are connected with three antennas. Each of the antennas has a 60/spl deg/-slope to the underlying surface and the second antenna is turned by 35/spl deg/ from the plane passing through the first and the third antennas. The aperture diameter of each antenna is 50 mm. The device is used as follows: the pressure sensor is fastened to a brake pedal, the three-beam autodyne radio-locator monounit is hitched to the side surface of the vehicle body by means of a magnetic system.