电容式接近引信电极电位的研究

IEEE 2011 10th International Conference on Electronic Measurement & Instruments Pub Date : 2011-10-10 DOI:10.1109/ICEMI.2011.6037726

Z. Xin, Zhanzhong Cui, Lixin Xu

{"title":"电容式接近引信电极电位的研究","authors":"Z. Xin, Zhanzhong Cui, Lixin Xu","doi":"10.1109/ICEMI.2011.6037726","DOIUrl":null,"url":null,"abstract":"Detection mechanism of capacitance proximity fuze is the base of fuze design work. Electric field and circuit methods are used to calculate the potential proportional relationship between the two electrodes. The potential of electrode I is obtained through experiment. Thus we can get the potential of electrode II. Pispce software is used to simulate the whole circuit, and get the simulation result of potential of electrode II. The experiment comes to the conclusions as following: the potential of electrode II decreases when fuze gets close to the target; and the potential proportional relationship between the two electrodes based on the two methods are nearly same; potential of electrode II based on theory and experiment fits the result of simulation.","PeriodicalId":321964,"journal":{"name":"IEEE 2011 10th International Conference on Electronic Measurement & Instruments","volume":"7 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2011-10-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Study on electrode potential of capacitance proximity fuze\",\"authors\":\"Z. Xin, Zhanzhong Cui, Lixin Xu\",\"doi\":\"10.1109/ICEMI.2011.6037726\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Detection mechanism of capacitance proximity fuze is the base of fuze design work. Electric field and circuit methods are used to calculate the potential proportional relationship between the two electrodes. The potential of electrode I is obtained through experiment. Thus we can get the potential of electrode II. Pispce software is used to simulate the whole circuit, and get the simulation result of potential of electrode II. The experiment comes to the conclusions as following: the potential of electrode II decreases when fuze gets close to the target; and the potential proportional relationship between the two electrodes based on the two methods are nearly same; potential of electrode II based on theory and experiment fits the result of simulation.\",\"PeriodicalId\":321964,\"journal\":{\"name\":\"IEEE 2011 10th International Conference on Electronic Measurement & Instruments\",\"volume\":\"7 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2011-10-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE 2011 10th International Conference on Electronic Measurement & Instruments\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICEMI.2011.6037726\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE 2011 10th International Conference on Electronic Measurement & Instruments","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICEMI.2011.6037726","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

电容式接近引信的检测机构是引信设计工作的基础。采用电场法和电路法计算了两电极之间的电位比例关系。通过实验得到电极I的电位。从而得到电极II的电势。利用Pispce软件对整个电路进行仿真，得到电极II电位的仿真结果。实验结果表明:引信靠近目标时，II电极电位减小;两种方法得到的电极电位比例关系基本一致;通过理论和实验对电极II的电势进行了拟合。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Study on electrode potential of capacitance proximity fuze

Detection mechanism of capacitance proximity fuze is the base of fuze design work. Electric field and circuit methods are used to calculate the potential proportional relationship between the two electrodes. The potential of electrode I is obtained through experiment. Thus we can get the potential of electrode II. Pispce software is used to simulate the whole circuit, and get the simulation result of potential of electrode II. The experiment comes to the conclusions as following: the potential of electrode II decreases when fuze gets close to the target; and the potential proportional relationship between the two electrodes based on the two methods are nearly same; potential of electrode II based on theory and experiment fits the result of simulation.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

IEEE 2011 10th International Conference on Electronic Measurement & Instruments

自引率

0.00%

发文量