不同齿形线性开关磁阻发电机性能分析。发电质量因子

2013 13th International Conference on Environment and Electrical Engineering (EEEIC) Pub Date : 2013-11-01 DOI:10.1109/EEEIC-2.2013.6737924

R. Mendes, M. Calado, S. Mariano

{"title":"不同齿形线性开关磁阻发电机性能分析。发电质量因子","authors":"R. Mendes, M. Calado, S. Mariano","doi":"10.1109/EEEIC-2.2013.6737924","DOIUrl":null,"url":null,"abstract":"This work presents the evaluation of different teeth shape geometries of a tubular linear switched reluctance generator in order to maximize the machine capabilities for power generation at low speeds in direct drive wave energy converters. For a 1.5 KW 3 phase generator, different geometries will be proposed and evaluated with the scope to achieve greater electromotive force for low speeds despite the adopted control strategy. The optimization study is support by a 2D FEM analysis through which different geometric parameters will be evaluated to maximize the inductance change with the relative displacement between the stationary and mover parts of the machine.","PeriodicalId":445295,"journal":{"name":"2013 13th International Conference on Environment and Electrical Engineering (EEEIC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Performance analysis of linear switched reluctance generator for different teeth shapes. The generation quality factor\",\"authors\":\"R. Mendes, M. Calado, S. Mariano\",\"doi\":\"10.1109/EEEIC-2.2013.6737924\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work presents the evaluation of different teeth shape geometries of a tubular linear switched reluctance generator in order to maximize the machine capabilities for power generation at low speeds in direct drive wave energy converters. For a 1.5 KW 3 phase generator, different geometries will be proposed and evaluated with the scope to achieve greater electromotive force for low speeds despite the adopted control strategy. The optimization study is support by a 2D FEM analysis through which different geometric parameters will be evaluated to maximize the inductance change with the relative displacement between the stationary and mover parts of the machine.\",\"PeriodicalId\":445295,\"journal\":{\"name\":\"2013 13th International Conference on Environment and Electrical Engineering (EEEIC)\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2013 13th International Conference on Environment and Electrical Engineering (EEEIC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/EEEIC-2.2013.6737924\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2013 13th International Conference on Environment and Electrical Engineering (EEEIC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/EEEIC-2.2013.6737924","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

这项工作提出了管状线性开关磁阻发电机的不同齿形几何形状的评估，以最大限度地提高机器在直接驱动波能转换器中低速发电的能力。对于1.5 KW三相发电机，尽管采用了控制策略，但仍将提出不同的几何形状并评估其在低速下获得更大电动势的范围。优化研究通过二维有限元分析来支持，通过不同的几何参数来评估，以最大限度地提高电感随机器的静止和运动部件之间的相对位移的变化。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Performance analysis of linear switched reluctance generator for different teeth shapes. The generation quality factor

This work presents the evaluation of different teeth shape geometries of a tubular linear switched reluctance generator in order to maximize the machine capabilities for power generation at low speeds in direct drive wave energy converters. For a 1.5 KW 3 phase generator, different geometries will be proposed and evaluated with the scope to achieve greater electromotive force for low speeds despite the adopted control strategy. The optimization study is support by a 2D FEM analysis through which different geometric parameters will be evaluated to maximize the inductance change with the relative displacement between the stationary and mover parts of the machine.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2013 13th International Conference on Environment and Electrical Engineering (EEEIC)

自引率

0.00%

发文量