利用对数啁啾激励电压加速FDS测量的方法

S. Chatterjee, S. Dalai, B. Chatterjee, S. Chakravorti
{"title":"利用对数啁啾激励电压加速FDS测量的方法","authors":"S. Chatterjee, S. Dalai, B. Chatterjee, S. Chakravorti","doi":"10.1109/CATCON.2017.8280222","DOIUrl":null,"url":null,"abstract":"This paper reports an application of logarithmic chirp waveform as a broadband excitation to reduce Frequency Domain Spectroscopy (FDS) measurement time for condition monitoring of oil paper insulation of transformer. In conventional FDS measurement, the insulation under test is subjected to sinusoidal excitation voltage over the frequency range 1kHz-0.1mHz, for a period of two cycles. Due to frequency sweep down to 0.1mHz, conventional FDS measurement takes significantly longer time to perform at site, which is a practical problem. In an attempt to solve this problem, a different approach is adopted in this work which is capable of reducing FDS measurement time appreciably. Instead of applying conventional sinusoidal excitation, a broadband excitation voltage in the form of logarithmic chirp waveform band limited from 1Hz-0.1mHz is used to conduct FDS measurement in the laboratory. The method is experimentally verified on two real life transformers, which validates the practical applicability of the proposed technique.","PeriodicalId":250717,"journal":{"name":"2017 3rd International Conference on Condition Assessment Techniques in Electrical Systems (CATCON)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2017-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"A method to accelerate FDS measurement using logarithmic chirp excitation voltage\",\"authors\":\"S. Chatterjee, S. Dalai, B. Chatterjee, S. Chakravorti\",\"doi\":\"10.1109/CATCON.2017.8280222\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper reports an application of logarithmic chirp waveform as a broadband excitation to reduce Frequency Domain Spectroscopy (FDS) measurement time for condition monitoring of oil paper insulation of transformer. In conventional FDS measurement, the insulation under test is subjected to sinusoidal excitation voltage over the frequency range 1kHz-0.1mHz, for a period of two cycles. Due to frequency sweep down to 0.1mHz, conventional FDS measurement takes significantly longer time to perform at site, which is a practical problem. In an attempt to solve this problem, a different approach is adopted in this work which is capable of reducing FDS measurement time appreciably. Instead of applying conventional sinusoidal excitation, a broadband excitation voltage in the form of logarithmic chirp waveform band limited from 1Hz-0.1mHz is used to conduct FDS measurement in the laboratory. The method is experimentally verified on two real life transformers, which validates the practical applicability of the proposed technique.\",\"PeriodicalId\":250717,\"journal\":{\"name\":\"2017 3rd International Conference on Condition Assessment Techniques in Electrical Systems (CATCON)\",\"volume\":\"6 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2017 3rd International Conference on Condition Assessment Techniques in Electrical Systems (CATCON)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CATCON.2017.8280222\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2017 3rd International Conference on Condition Assessment Techniques in Electrical Systems (CATCON)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CATCON.2017.8280222","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

摘要

采用对数啁啾波形作为宽带激励,减少了变压器油纸绝缘状态监测的频域谱(FDS)测量时间。在传统的FDS测量中,被测绝缘在1kHz-0.1mHz的频率范围内受到正弦激励电压,周期为两个周期。由于扫描频率低至0.1mHz,传统的FDS测量在现场需要花费更长的时间,这是一个实际问题。为了解决这一问题,本文采用了一种不同的方法,可以显著缩短FDS的测量时间。在实验室中,采用对数啁啾波形1Hz-0.1mHz的宽带激励电压代替传统的正弦激励进行FDS测量。在两台实际变压器上对该方法进行了实验验证,验证了该方法的实用性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
A method to accelerate FDS measurement using logarithmic chirp excitation voltage
This paper reports an application of logarithmic chirp waveform as a broadband excitation to reduce Frequency Domain Spectroscopy (FDS) measurement time for condition monitoring of oil paper insulation of transformer. In conventional FDS measurement, the insulation under test is subjected to sinusoidal excitation voltage over the frequency range 1kHz-0.1mHz, for a period of two cycles. Due to frequency sweep down to 0.1mHz, conventional FDS measurement takes significantly longer time to perform at site, which is a practical problem. In an attempt to solve this problem, a different approach is adopted in this work which is capable of reducing FDS measurement time appreciably. Instead of applying conventional sinusoidal excitation, a broadband excitation voltage in the form of logarithmic chirp waveform band limited from 1Hz-0.1mHz is used to conduct FDS measurement in the laboratory. The method is experimentally verified on two real life transformers, which validates the practical applicability of the proposed technique.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信