超宽带系统低功率光纤无线电链路的优化

V. Sipal, D. Edwards, B. Allen
{"title":"超宽带系统低功率光纤无线电链路的优化","authors":"V. Sipal, D. Edwards, B. Allen","doi":"10.1109/ICUWB.2011.6058919","DOIUrl":null,"url":null,"abstract":"This paper focuses on the design of Radio-over-fibre (ROF) links for ultrawideband (UWB) applications. Due to strict regulations, network architecture and technical feasibility, UWB ROF links must have 0 dB gain, low noise figure and low DC power dissipation. Due to the low power of UWB signals, pre-amplification is possible. Design rules for UWB ROF links with a pre-amplifier are presented. If followed, these rules enable design of links with a lower noise figure and power dissipation than previous design rules yield for general purpose ROF links. This is illustrated by a ROF link for UWB channel sounding that requires only 27.3% of DC power compared to a commercial link with similar gain and noise figure.","PeriodicalId":143107,"journal":{"name":"2011 IEEE International Conference on Ultra-Wideband (ICUWB)","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2011-10-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Optimisation of low power Radio-over-fibre links for UWB systems\",\"authors\":\"V. Sipal, D. Edwards, B. Allen\",\"doi\":\"10.1109/ICUWB.2011.6058919\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper focuses on the design of Radio-over-fibre (ROF) links for ultrawideband (UWB) applications. Due to strict regulations, network architecture and technical feasibility, UWB ROF links must have 0 dB gain, low noise figure and low DC power dissipation. Due to the low power of UWB signals, pre-amplification is possible. Design rules for UWB ROF links with a pre-amplifier are presented. If followed, these rules enable design of links with a lower noise figure and power dissipation than previous design rules yield for general purpose ROF links. This is illustrated by a ROF link for UWB channel sounding that requires only 27.3% of DC power compared to a commercial link with similar gain and noise figure.\",\"PeriodicalId\":143107,\"journal\":{\"name\":\"2011 IEEE International Conference on Ultra-Wideband (ICUWB)\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2011-10-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2011 IEEE International Conference on Ultra-Wideband (ICUWB)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICUWB.2011.6058919\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2011 IEEE International Conference on Ultra-Wideband (ICUWB)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICUWB.2011.6058919","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

本文主要研究超宽带(UWB)应用中光纤无线电(ROF)链路的设计。由于严格的法规、网络架构和技术可行性,UWB ROF链路必须具有0 dB增益、低噪声系数和低直流功耗。由于超宽带信号的低功率,可以进行预放大。提出了带前置放大器的超宽带ROF链路的设计原则。如果遵循这些规则,则可以设计出比以前设计规则产生的通用ROF链路具有更低噪声系数和功耗的链路。用于UWB信道探测的ROF链路说明了这一点,与具有相似增益和噪声系数的商用链路相比,它只需要27.3%的直流功率。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Optimisation of low power Radio-over-fibre links for UWB systems
This paper focuses on the design of Radio-over-fibre (ROF) links for ultrawideband (UWB) applications. Due to strict regulations, network architecture and technical feasibility, UWB ROF links must have 0 dB gain, low noise figure and low DC power dissipation. Due to the low power of UWB signals, pre-amplification is possible. Design rules for UWB ROF links with a pre-amplifier are presented. If followed, these rules enable design of links with a lower noise figure and power dissipation than previous design rules yield for general purpose ROF links. This is illustrated by a ROF link for UWB channel sounding that requires only 27.3% of DC power compared to a commercial link with similar gain and noise figure.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信