{"title":"squid的低t /sub - c/斜坡型Josephson连接","authors":"M. Podt, B.G.A. Rolink, J. Flokstra, H. Rogalla","doi":"10.1109/WOLTE.2002.1022466","DOIUrl":null,"url":null,"abstract":"The Josephson tunnel junction is the basic element of a superconducting quantum interference device (SQUID). Amongst other parameters, the junction capacitance determines the characteristics of a (digital) SQUID. In a conventional dc SQUID, reducing the junction capacitance decreases the flux noise of the sensor, whereas in digital SQUIDs, the operating frequency can be increased when reducing the junction capacitance. For digital SQUIDs, this means that not only the flux noise decreases, but also the flux slew rate increases. Slew rates up to l0(8) @ds can be achieved by reducing the junction size to the sub-pm2 level. Using a ramp-type structure allows sub-pm2 Josephson junctions sizes using standard lithography. In this paper we present the first results on low-T, ramp-type Josephson junctions and dc SQUIDs based on these junctions. The first junctions and SQUIDs showed nonhysteretic behavior at 4.2 K caused by the A1 bottom layer in the design.","PeriodicalId":338080,"journal":{"name":"Proceedings of the 5th European Workshop on Low Temperature Electronics","volume":"42 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2002-11-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Low-T/sub c/ ramp-type Josephson junctions for SQUIDs\",\"authors\":\"M. Podt, B.G.A. Rolink, J. Flokstra, H. Rogalla\",\"doi\":\"10.1109/WOLTE.2002.1022466\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The Josephson tunnel junction is the basic element of a superconducting quantum interference device (SQUID). Amongst other parameters, the junction capacitance determines the characteristics of a (digital) SQUID. In a conventional dc SQUID, reducing the junction capacitance decreases the flux noise of the sensor, whereas in digital SQUIDs, the operating frequency can be increased when reducing the junction capacitance. For digital SQUIDs, this means that not only the flux noise decreases, but also the flux slew rate increases. Slew rates up to l0(8) @ds can be achieved by reducing the junction size to the sub-pm2 level. Using a ramp-type structure allows sub-pm2 Josephson junctions sizes using standard lithography. In this paper we present the first results on low-T, ramp-type Josephson junctions and dc SQUIDs based on these junctions. The first junctions and SQUIDs showed nonhysteretic behavior at 4.2 K caused by the A1 bottom layer in the design.\",\"PeriodicalId\":338080,\"journal\":{\"name\":\"Proceedings of the 5th European Workshop on Low Temperature Electronics\",\"volume\":\"42 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2002-11-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of the 5th European Workshop on Low Temperature Electronics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/WOLTE.2002.1022466\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the 5th European Workshop on Low Temperature Electronics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/WOLTE.2002.1022466","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Low-T/sub c/ ramp-type Josephson junctions for SQUIDs
The Josephson tunnel junction is the basic element of a superconducting quantum interference device (SQUID). Amongst other parameters, the junction capacitance determines the characteristics of a (digital) SQUID. In a conventional dc SQUID, reducing the junction capacitance decreases the flux noise of the sensor, whereas in digital SQUIDs, the operating frequency can be increased when reducing the junction capacitance. For digital SQUIDs, this means that not only the flux noise decreases, but also the flux slew rate increases. Slew rates up to l0(8) @ds can be achieved by reducing the junction size to the sub-pm2 level. Using a ramp-type structure allows sub-pm2 Josephson junctions sizes using standard lithography. In this paper we present the first results on low-T, ramp-type Josephson junctions and dc SQUIDs based on these junctions. The first junctions and SQUIDs showed nonhysteretic behavior at 4.2 K caused by the A1 bottom layer in the design.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
