Burst-mode transmitter for 1.25Gb/s Ethernet PON applications [passive optical networks]

This paper presents a burst-mode 1.25 Gb/s transmitter, suitable for use in Ethernet PON (E-PON) applications. With a burst enable signal, the transmitter proposed in this paper allows fast responses from the beginning of high-speed burst data while a conventional automatic power control circuit, based on feedback from a monitor photodiode, was used. The chip was implemented in 0.18 /spl mu/m CMOS technology and occupies an area of 0.9/spl times/0.75 mm/sup 2/ with about 260 mW power dissipation under 3.3 V supply. Measurements show a stable transmitted optical power over a wide temperature range (-40/spl deg/C to 80/spl deg/C) with above 10 dB extinction ratio.