采用自组装单层膜的表面声波气相传感器

T. Nomura, A. Saitoh, S. Furukawa
{"title":"采用自组装单层膜的表面声波气相传感器","authors":"T. Nomura, A. Saitoh, S. Furukawa","doi":"10.1109/ULTSYM.1998.762204","DOIUrl":null,"url":null,"abstract":"A surface acoustic wave (SAW) sensor for measuring environment is presented. SAW devices respond to changes in the mass on its surface with a shift in frequency, and offer many attractive features for applications as a gas and liquid phase sensor. In the most gas phase sensor, the device surface is coated with a thin selective film. In this paper a SAW delay line coated with self-assembled (SA) film has been used as environment sensor. A dual delay line was fabricated on a single lithium niobate (128/spl deg/ Y cut X propagating LiNbO/sub 3/) substrate and the propagation path was coated with the selective polymer film deposited by SA transfer technique. The polystyrene sulfonic acid sodium was used as a gas sensing material. Due to sorption of molecules, the electrical conductivity of the SA film changes. The effects caused to reduce the velocity of the SAW. Experimental results showed that the SAW velocity change was quite linear in proportion to the concentration of organic gases. Rapid and totally reversible responses were obtained by using a SA monolayer film.","PeriodicalId":175797,"journal":{"name":"1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1998-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Surface acoustic wave gas phase sensor using self-assembled monolayer film\",\"authors\":\"T. Nomura, A. Saitoh, S. Furukawa\",\"doi\":\"10.1109/ULTSYM.1998.762204\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A surface acoustic wave (SAW) sensor for measuring environment is presented. SAW devices respond to changes in the mass on its surface with a shift in frequency, and offer many attractive features for applications as a gas and liquid phase sensor. In the most gas phase sensor, the device surface is coated with a thin selective film. In this paper a SAW delay line coated with self-assembled (SA) film has been used as environment sensor. A dual delay line was fabricated on a single lithium niobate (128/spl deg/ Y cut X propagating LiNbO/sub 3/) substrate and the propagation path was coated with the selective polymer film deposited by SA transfer technique. The polystyrene sulfonic acid sodium was used as a gas sensing material. Due to sorption of molecules, the electrical conductivity of the SA film changes. The effects caused to reduce the velocity of the SAW. Experimental results showed that the SAW velocity change was quite linear in proportion to the concentration of organic gases. Rapid and totally reversible responses were obtained by using a SA monolayer film.\",\"PeriodicalId\":175797,\"journal\":{\"name\":\"1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102)\",\"volume\":\"22 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1998-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ULTSYM.1998.762204\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ULTSYM.1998.762204","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

提出了一种用于环境测量的表面声波传感器。SAW器件对其表面质量的变化做出响应,频率发生变化,并为气相和液相传感器的应用提供了许多有吸引力的特性。在大多数气相传感器中,器件表面涂有一层薄薄的选择性薄膜。本文采用自组装膜包覆SAW延迟线作为环境传感器。在单一铌酸锂(128/spl度/ Y切割X传播LiNbO/ sub3 /)衬底上制备了双延迟线,并在其传播路径上涂覆了采用SA转移技术沉积的选择性聚合物薄膜。采用聚苯乙烯磺酸钠作为气敏材料。由于分子的吸附,SA膜的电导率发生了变化。造成声表面波速度降低的影响。实验结果表明,SAW的速度变化与有机气体的浓度成线性关系。利用SA单层膜可获得快速且完全可逆的反应。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Surface acoustic wave gas phase sensor using self-assembled monolayer film
A surface acoustic wave (SAW) sensor for measuring environment is presented. SAW devices respond to changes in the mass on its surface with a shift in frequency, and offer many attractive features for applications as a gas and liquid phase sensor. In the most gas phase sensor, the device surface is coated with a thin selective film. In this paper a SAW delay line coated with self-assembled (SA) film has been used as environment sensor. A dual delay line was fabricated on a single lithium niobate (128/spl deg/ Y cut X propagating LiNbO/sub 3/) substrate and the propagation path was coated with the selective polymer film deposited by SA transfer technique. The polystyrene sulfonic acid sodium was used as a gas sensing material. Due to sorption of molecules, the electrical conductivity of the SA film changes. The effects caused to reduce the velocity of the SAW. Experimental results showed that the SAW velocity change was quite linear in proportion to the concentration of organic gases. Rapid and totally reversible responses were obtained by using a SA monolayer film.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书