A. Toccafondi, Daniele Zampilli, C. D. Giovampaola, V. Tesi
{"title":"用于RFID转发器应用的低功率UWB发射机","authors":"A. Toccafondi, Daniele Zampilli, C. D. Giovampaola, V. Tesi","doi":"10.1109/RFID-TA.2012.6404519","DOIUrl":null,"url":null,"abstract":"An UWB low power active transmitter operating in the European UWB band (6-8.5 GHz) is presented, which may find applications in RFID transponders with asymmetric downlink and uplink communication, as well as in others communication devices. It is based on a 7.25 GHz oscillator driven by a base-band pulse generator, and connected to a small size UWB antenna. The oscillator is turned on and off by the base-band pulsed control voltage, according to a modulation scheme, and it consumes power only when the 7.25 GHz pulse is generated. The RF pulse waveform exhibits a peak amplitude of about 2.2 Vpp and a width of about 2 ns. The power spectral density of the single UWB pulse is in accordance with the European UWB mask. A planar compact UWB antenna is also proposed as the load of the transmitter. It shows a return loss lower than -14 dB in the operating frequency band.","PeriodicalId":232862,"journal":{"name":"2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)","volume":"108 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"9","resultStr":"{\"title\":\"Low-power UWB transmitter for RFID transponder applications\",\"authors\":\"A. Toccafondi, Daniele Zampilli, C. D. Giovampaola, V. Tesi\",\"doi\":\"10.1109/RFID-TA.2012.6404519\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"An UWB low power active transmitter operating in the European UWB band (6-8.5 GHz) is presented, which may find applications in RFID transponders with asymmetric downlink and uplink communication, as well as in others communication devices. It is based on a 7.25 GHz oscillator driven by a base-band pulse generator, and connected to a small size UWB antenna. The oscillator is turned on and off by the base-band pulsed control voltage, according to a modulation scheme, and it consumes power only when the 7.25 GHz pulse is generated. The RF pulse waveform exhibits a peak amplitude of about 2.2 Vpp and a width of about 2 ns. The power spectral density of the single UWB pulse is in accordance with the European UWB mask. A planar compact UWB antenna is also proposed as the load of the transmitter. It shows a return loss lower than -14 dB in the operating frequency band.\",\"PeriodicalId\":232862,\"journal\":{\"name\":\"2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)\",\"volume\":\"108 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"9\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/RFID-TA.2012.6404519\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/RFID-TA.2012.6404519","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Low-power UWB transmitter for RFID transponder applications
An UWB low power active transmitter operating in the European UWB band (6-8.5 GHz) is presented, which may find applications in RFID transponders with asymmetric downlink and uplink communication, as well as in others communication devices. It is based on a 7.25 GHz oscillator driven by a base-band pulse generator, and connected to a small size UWB antenna. The oscillator is turned on and off by the base-band pulsed control voltage, according to a modulation scheme, and it consumes power only when the 7.25 GHz pulse is generated. The RF pulse waveform exhibits a peak amplitude of about 2.2 Vpp and a width of about 2 ns. The power spectral density of the single UWB pulse is in accordance with the European UWB mask. A planar compact UWB antenna is also proposed as the load of the transmitter. It shows a return loss lower than -14 dB in the operating frequency band.