T. Uchida, Y. Ishizuka, D. Yamashita, Toshiro Hirose, Kazuto Ura
{"title":"双有源桥式DC-DC变换器在不同电压比下保持软开关的控制方法","authors":"T. Uchida, Y. Ishizuka, D. Yamashita, Toshiro Hirose, Kazuto Ura","doi":"10.1109/APEC39645.2020.9124409","DOIUrl":null,"url":null,"abstract":"In recent years, a system using renewable energy has attracted attention, and power converters with high power efficiency and low cost are required. Dual Active Bridge (DAB) DC- DC converters are attracting attention because of their high power-efficiency due to Zero Voltage Switching (ZVS) operation over a wide load range. However, when the voltage input/output ratio is different from the turns ratio of the transformer, there is a disadvantage that the ZVS operation cannot be achieved at light loads, and the power efficiency drops. Therefore, this paper proposes a digital control method that can improve power efficiency at light loads regardless of the voltage input/output conversion ratio. In the experiment, it was confirmed that the power efficiency at light loads could be improved by about 10% when the input/output ratio is 200V / 150V, 150V / 100V, and 125V / 75 V.","PeriodicalId":171455,"journal":{"name":"2020 IEEE Applied Power Electronics Conference and Exposition (APEC)","volume":"101 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"A Control Method of Dual Active Bridge DC-DC Converters Maintaining Soft-Switching at Different Voltage Ratio\",\"authors\":\"T. Uchida, Y. Ishizuka, D. Yamashita, Toshiro Hirose, Kazuto Ura\",\"doi\":\"10.1109/APEC39645.2020.9124409\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In recent years, a system using renewable energy has attracted attention, and power converters with high power efficiency and low cost are required. Dual Active Bridge (DAB) DC- DC converters are attracting attention because of their high power-efficiency due to Zero Voltage Switching (ZVS) operation over a wide load range. However, when the voltage input/output ratio is different from the turns ratio of the transformer, there is a disadvantage that the ZVS operation cannot be achieved at light loads, and the power efficiency drops. Therefore, this paper proposes a digital control method that can improve power efficiency at light loads regardless of the voltage input/output conversion ratio. In the experiment, it was confirmed that the power efficiency at light loads could be improved by about 10% when the input/output ratio is 200V / 150V, 150V / 100V, and 125V / 75 V.\",\"PeriodicalId\":171455,\"journal\":{\"name\":\"2020 IEEE Applied Power Electronics Conference and Exposition (APEC)\",\"volume\":\"101 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-03-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2020 IEEE Applied Power Electronics Conference and Exposition (APEC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/APEC39645.2020.9124409\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2020 IEEE Applied Power Electronics Conference and Exposition (APEC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/APEC39645.2020.9124409","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
A Control Method of Dual Active Bridge DC-DC Converters Maintaining Soft-Switching at Different Voltage Ratio
In recent years, a system using renewable energy has attracted attention, and power converters with high power efficiency and low cost are required. Dual Active Bridge (DAB) DC- DC converters are attracting attention because of their high power-efficiency due to Zero Voltage Switching (ZVS) operation over a wide load range. However, when the voltage input/output ratio is different from the turns ratio of the transformer, there is a disadvantage that the ZVS operation cannot be achieved at light loads, and the power efficiency drops. Therefore, this paper proposes a digital control method that can improve power efficiency at light loads regardless of the voltage input/output conversion ratio. In the experiment, it was confirmed that the power efficiency at light loads could be improved by about 10% when the input/output ratio is 200V / 150V, 150V / 100V, and 125V / 75 V.