超宽带低噪声放大器输入阻抗匹配的设计考虑

Zhe-Yang Huang, Che-Cheng Huang, Meng-Ping Chen, Yeh-Tai Hung
{"title":"超宽带低噪声放大器输入阻抗匹配的设计考虑","authors":"Zhe-Yang Huang, Che-Cheng Huang, Meng-Ping Chen, Yeh-Tai Hung","doi":"10.1109/ICMMT.2008.4540352","DOIUrl":null,"url":null,"abstract":"A multi-stage low-noise amplifier (LNA) with LC-tank load to extend the bandwidth is designed for ultra-wideband (UWB) wireless receiver. The design consists of three LC-tank cascode amplifier and one output buffer and is implemented in 0.18um RF CMOS process. The trade off on noise figure and chip area in low-noise amplifier design is discussed. The two LNA (LC and Res) gives 14.5 dB gain; 7.2 GHz and 7.0 GHz 3 dB bandwidth (3.1-10.3 GHz and 3.1- 10.1 GHz) while consuming 22.8 mW and 23.8 mW through a 1.5 V supply. Over the 3.1 GHz - 10.3 GHz and 3.1 GHz- 10.1 GHz frequency band, a minimum noise figure of 2.6 dB and 6.3 dB and input return loss lower than -8.8 dB and - 6.8 dB have been achieved.","PeriodicalId":315133,"journal":{"name":"2008 International Conference on Microwave and Millimeter Wave Technology","volume":"13 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2008-04-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":"{\"title\":\"Design considerations on input impedance matching for ultra-wideband low-noise amplifier\",\"authors\":\"Zhe-Yang Huang, Che-Cheng Huang, Meng-Ping Chen, Yeh-Tai Hung\",\"doi\":\"10.1109/ICMMT.2008.4540352\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A multi-stage low-noise amplifier (LNA) with LC-tank load to extend the bandwidth is designed for ultra-wideband (UWB) wireless receiver. The design consists of three LC-tank cascode amplifier and one output buffer and is implemented in 0.18um RF CMOS process. The trade off on noise figure and chip area in low-noise amplifier design is discussed. The two LNA (LC and Res) gives 14.5 dB gain; 7.2 GHz and 7.0 GHz 3 dB bandwidth (3.1-10.3 GHz and 3.1- 10.1 GHz) while consuming 22.8 mW and 23.8 mW through a 1.5 V supply. Over the 3.1 GHz - 10.3 GHz and 3.1 GHz- 10.1 GHz frequency band, a minimum noise figure of 2.6 dB and 6.3 dB and input return loss lower than -8.8 dB and - 6.8 dB have been achieved.\",\"PeriodicalId\":315133,\"journal\":{\"name\":\"2008 International Conference on Microwave and Millimeter Wave Technology\",\"volume\":\"13 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2008-04-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"7\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2008 International Conference on Microwave and Millimeter Wave Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICMMT.2008.4540352\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 International Conference on Microwave and Millimeter Wave Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICMMT.2008.4540352","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 7

摘要

针对超宽带(UWB)无线接收机,设计了一种LC-tank负载多级低噪声放大器(LNA)来扩展带宽。该设计由三个LC-tank级联放大器和一个输出缓冲器组成,采用0.18um RF CMOS工艺实现。讨论了低噪声放大器设计中噪声系数与芯片面积的权衡。两个LNA (LC和Res)的增益为14.5 dB;7.2 GHz和7.0 GHz 3db带宽(3.1-10.3 GHz和3.1- 10.1 GHz),同时通过1.5 V电源消耗22.8 mW和23.8 mW。在3.1 GHz ~ 10.3 GHz和3.1 GHz ~ 10.1 GHz频段,最小噪声系数分别为2.6 dB和6.3 dB,输入回波损耗分别低于-8.8 dB和- 6.8 dB。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Design considerations on input impedance matching for ultra-wideband low-noise amplifier
A multi-stage low-noise amplifier (LNA) with LC-tank load to extend the bandwidth is designed for ultra-wideband (UWB) wireless receiver. The design consists of three LC-tank cascode amplifier and one output buffer and is implemented in 0.18um RF CMOS process. The trade off on noise figure and chip area in low-noise amplifier design is discussed. The two LNA (LC and Res) gives 14.5 dB gain; 7.2 GHz and 7.0 GHz 3 dB bandwidth (3.1-10.3 GHz and 3.1- 10.1 GHz) while consuming 22.8 mW and 23.8 mW through a 1.5 V supply. Over the 3.1 GHz - 10.3 GHz and 3.1 GHz- 10.1 GHz frequency band, a minimum noise figure of 2.6 dB and 6.3 dB and input return loss lower than -8.8 dB and - 6.8 dB have been achieved.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信