电机。带矩形截面导线的环形绕组的匝间电容

2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART) Pub Date : 2015-11-01 DOI:10.1109/SMART.2015.7399244

N. Djukic, L. Encica, Johannes J. H. Paulides

{"title":"电机。带矩形截面导线的环形绕组的匝间电容","authors":"N. Djukic, L. Encica, Johannes J. H. Paulides","doi":"10.1109/SMART.2015.7399244","DOIUrl":null,"url":null,"abstract":"Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors - finite element (FE) method and two previously published analytical methods are applied. Three different sizes of wires are used for this calculation. Further, every model of the wire is considered as an ideal rectangle in the first case, i.e. without the corner radii, and in the second case as it exists in reality, including the corner radii.","PeriodicalId":365573,"journal":{"name":"2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART)","volume":"297 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":"{\"title\":\"Electrical machines: Turn-to-turn capacitance in formed windings with rectangular cross-section wire\",\"authors\":\"N. Djukic, L. Encica, Johannes J. H. Paulides\",\"doi\":\"10.1109/SMART.2015.7399244\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors - finite element (FE) method and two previously published analytical methods are applied. Three different sizes of wires are used for this calculation. Further, every model of the wire is considered as an ideal rectangle in the first case, i.e. without the corner radii, and in the second case as it exists in reality, including the corner radii.\",\"PeriodicalId\":365573,\"journal\":{\"name\":\"2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART)\",\"volume\":\"297 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"4\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/SMART.2015.7399244\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/SMART.2015.7399244","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 4

摘要

给出了矩形截面导线形成绕组时电机匝间电容(Ctt)的计算。对于矩形导体的Ctt计算采用了三种计算方法——有限元法和两种已有的解析方法。在这个计算中使用了三种不同尺寸的电线。进一步，在第一种情况下，每个模型的导线都被认为是一个理想矩形，即没有角半径，在第二种情况下，它在现实中存在，包括角半径。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Electrical machines: Turn-to-turn capacitance in formed windings with rectangular cross-section wire

Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors - finite element (FE) method and two previously published analytical methods are applied. Three different sizes of wires are used for this calculation. Further, every model of the wire is considered as an ideal rectangle in the first case, i.e. without the corner radii, and in the second case as it exists in reality, including the corner radii.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART)

自引率

0.00%

发文量