{"title":"基于固定PWM信号的SRBC电路负载参数优化","authors":"N. Ahmad, N. Yahaya","doi":"10.1109/STUDENT.2012.6408353","DOIUrl":null,"url":null,"abstract":"This work is about the study and evaluation of the output parameters on SRBC circuit based on the optimized values of inductor, L, capacitor, C and resistor, R. The development of low power converters in future must have the capability to operate in megahertz switching frequency. This project will be based on simulation circuit using PSPICE software. The simulation will involve the study of the data sheet, circuit operation and the fundamental of SRBC circuit. Then, the results will be evaluated in terms of its output voltage and current. In addition, the voltage and current ripples which contribute to losses are also taken into consideration. It is found that the optimized parameter values for CCM are L = 15 μH, C = 0.625 μF and R = 3.5 Ω and whilst for DCM, L = 1 μH, C = 9.375 μF and R = 4 Ω.","PeriodicalId":282263,"journal":{"name":"2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT)","volume":"50 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Load parameter optimization of SRBC circuit using fixed PWM signals\",\"authors\":\"N. Ahmad, N. Yahaya\",\"doi\":\"10.1109/STUDENT.2012.6408353\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work is about the study and evaluation of the output parameters on SRBC circuit based on the optimized values of inductor, L, capacitor, C and resistor, R. The development of low power converters in future must have the capability to operate in megahertz switching frequency. This project will be based on simulation circuit using PSPICE software. The simulation will involve the study of the data sheet, circuit operation and the fundamental of SRBC circuit. Then, the results will be evaluated in terms of its output voltage and current. In addition, the voltage and current ripples which contribute to losses are also taken into consideration. It is found that the optimized parameter values for CCM are L = 15 μH, C = 0.625 μF and R = 3.5 Ω and whilst for DCM, L = 1 μH, C = 9.375 μF and R = 4 Ω.\",\"PeriodicalId\":282263,\"journal\":{\"name\":\"2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT)\",\"volume\":\"50 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/STUDENT.2012.6408353\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/STUDENT.2012.6408353","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
本工作是基于电感、L、电容、C和电阻r的优化值对SRBC电路的输出参数进行研究和评价。未来发展的低功率变换器必须具有在兆赫开关频率下工作的能力。本课题将基于PSPICE软件的仿真电路。该仿真将涉及数据表、电路操作和SRBC电路的基本原理的研究。然后，结果将根据其输出电压和电流进行评估。此外，还考虑了造成损耗的电压和电流脉动。结果表明，CCM的最佳参数值为L = 15 μH, C = 0.625 μF, R = 3.5 Ω; DCM的最佳参数值为L = 1 μH, C = 9.375 μF, R = 4 Ω。
Load parameter optimization of SRBC circuit using fixed PWM signals
This work is about the study and evaluation of the output parameters on SRBC circuit based on the optimized values of inductor, L, capacitor, C and resistor, R. The development of low power converters in future must have the capability to operate in megahertz switching frequency. This project will be based on simulation circuit using PSPICE software. The simulation will involve the study of the data sheet, circuit operation and the fundamental of SRBC circuit. Then, the results will be evaluated in terms of its output voltage and current. In addition, the voltage and current ripples which contribute to losses are also taken into consideration. It is found that the optimized parameter values for CCM are L = 15 μH, C = 0.625 μF and R = 3.5 Ω and whilst for DCM, L = 1 μH, C = 9.375 μF and R = 4 Ω.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
