基于双馈感应发电机(DFIG)的风力转换系统建模与控制

2009 International Conference on Power Engineering, Energy and Electrical Drives Pub Date : 2009-03-18 DOI:10.1109/POWERENG.2009.4915230

T. Ghennam, E. Berkouk, B. Francois

{"title":"基于双馈感应发电机(DFIG)的风力转换系统建模与控制","authors":"T. Ghennam, E. Berkouk, B. Francois","doi":"10.1109/POWERENG.2009.4915230","DOIUrl":null,"url":null,"abstract":"This paper presents a general modeling and an experimental validation of a Doubly Fed Induction Generator (DFIG) based Wind Conversion System (WCS). The Wind Conversion System has been briefly presented. Then, the d q control of the Grid Side Converter (GSC) has been detailed theoretically. Moreover, the decoupled active and reactive powers control of the DFIG has been presented. The last is carried out by using the Rotor Side Converter (RSC) to control the direct and quadrature components of the DFIG rotor currents. Both GSC and RSC control algorithms are implemented on a DSPACE board plugged in a Dell PC. The performance of the DFIG control is verified by experimental results.","PeriodicalId":246039,"journal":{"name":"2009 International Conference on Power Engineering, Energy and Electrical Drives","volume":"83 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2009-03-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"59","resultStr":"{\"title\":\"Modeling and control of a Doubly Fed Induction Generator (DFIG) based Wind Conversion System\",\"authors\":\"T. Ghennam, E. Berkouk, B. Francois\",\"doi\":\"10.1109/POWERENG.2009.4915230\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a general modeling and an experimental validation of a Doubly Fed Induction Generator (DFIG) based Wind Conversion System (WCS). The Wind Conversion System has been briefly presented. Then, the d q control of the Grid Side Converter (GSC) has been detailed theoretically. Moreover, the decoupled active and reactive powers control of the DFIG has been presented. The last is carried out by using the Rotor Side Converter (RSC) to control the direct and quadrature components of the DFIG rotor currents. Both GSC and RSC control algorithms are implemented on a DSPACE board plugged in a Dell PC. The performance of the DFIG control is verified by experimental results.\",\"PeriodicalId\":246039,\"journal\":{\"name\":\"2009 International Conference on Power Engineering, Energy and Electrical Drives\",\"volume\":\"83 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2009-03-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"59\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2009 International Conference on Power Engineering, Energy and Electrical Drives\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/POWERENG.2009.4915230\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2009 International Conference on Power Engineering, Energy and Electrical Drives","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/POWERENG.2009.4915230","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 59

摘要

本文介绍了基于双馈感应发电机(DFIG)的风力转换系统(WCS)的一般建模和实验验证。简要介绍了风力转换系统。然后，从理论上详细介绍了栅极侧变换器(GSC)的d q控制。在此基础上，提出了DFIG有功与无功的解耦控制方法。最后，利用转子侧变换器(RSC)控制DFIG转子电流的直接分量和正交分量。GSC和RSC控制算法都在插入戴尔PC的DSPACE板上实现。实验结果验证了DFIG控制的有效性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Modeling and control of a Doubly Fed Induction Generator (DFIG) based Wind Conversion System

This paper presents a general modeling and an experimental validation of a Doubly Fed Induction Generator (DFIG) based Wind Conversion System (WCS). The Wind Conversion System has been briefly presented. Then, the d q control of the Grid Side Converter (GSC) has been detailed theoretically. Moreover, the decoupled active and reactive powers control of the DFIG has been presented. The last is carried out by using the Rotor Side Converter (RSC) to control the direct and quadrature components of the DFIG rotor currents. Both GSC and RSC control algorithms are implemented on a DSPACE board plugged in a Dell PC. The performance of the DFIG control is verified by experimental results.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2009 International Conference on Power Engineering, Energy and Electrical Drives

自引率

0.00%

发文量