高频用蟹腿结构并联开关的设计与仿真

2020 6th International Conference on Signal Processing and Communication (ICSC) Pub Date : 2020-03-01 DOI:10.1109/ICSC48311.2020.9182757

Kuldeep Sharma, S. Bansal, S. Kaur, K. Prakash, Palak Dhiman, N. Gupta, A. Singh, Sanjeev Kumar, J. Vyas, Ashish Chauhan, M. Hooda

{"title":"高频用蟹腿结构并联开关的设计与仿真","authors":"Kuldeep Sharma, S. Bansal, S. Kaur, K. Prakash, Palak Dhiman, N. Gupta, A. Singh, Sanjeev Kumar, J. Vyas, Ashish Chauhan, M. Hooda","doi":"10.1109/ICSC48311.2020.9182757","DOIUrl":null,"url":null,"abstract":"This article describes electrostatic and electromechanical analysis for capacitive shunt RF switch using crab leg structure operating in the frequency range of 10-50 GHz. Two different conducting materials (Aluminum and Gold) have been used in this studied. This work focuses on the quantitative parameters, e.g., modal analysis, stress analysis, pull-in voltage, RF analysis and spring constant for different geometrical configuration of the switch. MATLAB, HFSS and COVENTOR software’s have been used for the analytical and full wave analysis of 3D structure, respectively. The electromagnetic (S11 > 20 dB, S21 > 25 dB) and electromechanical (Pull-in < 5.5 V) results are in good agreements.","PeriodicalId":334609,"journal":{"name":"2020 6th International Conference on Signal Processing and Communication (ICSC)","volume":"200 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Design and Simulation of Shunt Switch Using Crab-Leg Structure for High Frequency Application\",\"authors\":\"Kuldeep Sharma, S. Bansal, S. Kaur, K. Prakash, Palak Dhiman, N. Gupta, A. Singh, Sanjeev Kumar, J. Vyas, Ashish Chauhan, M. Hooda\",\"doi\":\"10.1109/ICSC48311.2020.9182757\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This article describes electrostatic and electromechanical analysis for capacitive shunt RF switch using crab leg structure operating in the frequency range of 10-50 GHz. Two different conducting materials (Aluminum and Gold) have been used in this studied. This work focuses on the quantitative parameters, e.g., modal analysis, stress analysis, pull-in voltage, RF analysis and spring constant for different geometrical configuration of the switch. MATLAB, HFSS and COVENTOR software’s have been used for the analytical and full wave analysis of 3D structure, respectively. The electromagnetic (S11 > 20 dB, S21 > 25 dB) and electromechanical (Pull-in < 5.5 V) results are in good agreements.\",\"PeriodicalId\":334609,\"journal\":{\"name\":\"2020 6th International Conference on Signal Processing and Communication (ICSC)\",\"volume\":\"200 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-03-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2020 6th International Conference on Signal Processing and Communication (ICSC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICSC48311.2020.9182757\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2020 6th International Conference on Signal Processing and Communication (ICSC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICSC48311.2020.9182757","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文对工作在10-50 GHz频率范围内的蟹状腿结构的电容并联射频开关进行了静电和机电分析。本研究使用了两种不同的导电材料(铝和金)。本文重点研究了开关不同几何结构的定量参数，如模态分析、应力分析、拉入电压、射频分析和弹簧常数。利用MATLAB、HFSS和covenor软件分别对三维结构进行了解析分析和全波分析。电磁(S11 > 20 dB, S21 > 25 dB)和机电(拉入< 5.5 V)结果一致。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design and Simulation of Shunt Switch Using Crab-Leg Structure for High Frequency Application

This article describes electrostatic and electromechanical analysis for capacitive shunt RF switch using crab leg structure operating in the frequency range of 10-50 GHz. Two different conducting materials (Aluminum and Gold) have been used in this studied. This work focuses on the quantitative parameters, e.g., modal analysis, stress analysis, pull-in voltage, RF analysis and spring constant for different geometrical configuration of the switch. MATLAB, HFSS and COVENTOR software’s have been used for the analytical and full wave analysis of 3D structure, respectively. The electromagnetic (S11 > 20 dB, S21 > 25 dB) and electromechanical (Pull-in < 5.5 V) results are in good agreements.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2020 6th International Conference on Signal Processing and Communication (ICSC)

自引率

0.00%

发文量