低压低频能量采集器升压器设计的参数分析

Nurul Arfah Che Mustapha, A. Alam, Sheroz Khan, A. Azman
{"title":"低压低频能量采集器升压器设计的参数分析","authors":"Nurul Arfah Che Mustapha, A. Alam, Sheroz Khan, A. Azman","doi":"10.1109/RSM.2013.6706488","DOIUrl":null,"url":null,"abstract":"This work presents an ultra-low voltage DC-DC boost converter vibration-based energy harvesting. A switching gate controlled concept is used which is well suited for low vibration-based frequency and voltage applications. The 0.1-0.5 V input voltage range is linearly increased with the increase of output voltage range, 4-22 V. The transient analysis is simulated to verify the optimum value of the inductive resistance, switching rise and fall times circuit under test. The 10 kΩ load circuit is using 160 μH inductor and 10 μF load capacitor. This voltage converter is suitable for energy harvesting applications in automotive, buried electronic devices for broadband frequency range from 1 kHz to 10 kHz.","PeriodicalId":346255,"journal":{"name":"RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics","volume":"139 1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"Parametric analysis for designing low voltage and low frequency energy harvester booster\",\"authors\":\"Nurul Arfah Che Mustapha, A. Alam, Sheroz Khan, A. Azman\",\"doi\":\"10.1109/RSM.2013.6706488\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work presents an ultra-low voltage DC-DC boost converter vibration-based energy harvesting. A switching gate controlled concept is used which is well suited for low vibration-based frequency and voltage applications. The 0.1-0.5 V input voltage range is linearly increased with the increase of output voltage range, 4-22 V. The transient analysis is simulated to verify the optimum value of the inductive resistance, switching rise and fall times circuit under test. The 10 kΩ load circuit is using 160 μH inductor and 10 μF load capacitor. This voltage converter is suitable for energy harvesting applications in automotive, buried electronic devices for broadband frequency range from 1 kHz to 10 kHz.\",\"PeriodicalId\":346255,\"journal\":{\"name\":\"RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics\",\"volume\":\"139 1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-09-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/RSM.2013.6706488\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/RSM.2013.6706488","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6

摘要

本文提出了一种基于振动的超低电压DC-DC升压变换器。采用开关门控制概念,非常适合基于低振动的频率和电压应用。0.1-0.5 V的输入电压范围随输出电压范围的增大而线性增大,4- 22v。通过模拟暂态分析,验证了被测电路的感应电阻、开关升降次数的最佳值。10 kΩ负载电路采用160 μH的电感和10 μF的负载电容。该电压转换器适用于1 kHz至10 kHz宽带频率范围内的汽车、地埋电子设备的能量收集应用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Parametric analysis for designing low voltage and low frequency energy harvester booster
This work presents an ultra-low voltage DC-DC boost converter vibration-based energy harvesting. A switching gate controlled concept is used which is well suited for low vibration-based frequency and voltage applications. The 0.1-0.5 V input voltage range is linearly increased with the increase of output voltage range, 4-22 V. The transient analysis is simulated to verify the optimum value of the inductive resistance, switching rise and fall times circuit under test. The 10 kΩ load circuit is using 160 μH inductor and 10 μF load capacitor. This voltage converter is suitable for energy harvesting applications in automotive, buried electronic devices for broadband frequency range from 1 kHz to 10 kHz.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信