The Effect of Temperature and Time of Gasification Process and The Addition of Catalyst to The Composition of The Combustible Gas from The Wastes of Tobacco Leaves With Gasifier Updraft

The increasing industrial production is causing more of energy consumption needed. Tobacco leaves are waste from cigarette production that can be use as alternative biomass energy  to solve the problems of the energy crisis in the near future. Gasification is the conversion of solid carbon raw materials from biomass by the partial oxidation to be combustible gas (CO, H 2 , and CH 4 ) as an energy source. This research uses the fixed-bed reactor with capacity of 300 grams by the flow of updraft and raw material of waste tobacco leaves that have a size -14 + 18 mesh. The influence of temperature was research on 700 o C, 800 o C, and 900 o C with the reaction time for 20 minutes and the addition of a catalyst K 2 CO 3 . gasification medium used air and steam with the constant flow rate 0.504 m3/hour air and 0.0555 kg/minutes steam. Step of the process with the preparation of raw materials, the gasification process, and analysis of gas products. The result of the gasification process analysed using the gas chromatography, and the best results were obtained on the temperature 700 o C in the process time for 10 minutes produced combustible gas are CO = 22.82 % v, H 2 =  26.82 % v, CH 4 = 7.09 % v. increasing production gas happened when a catalyst K 2 CO 3 is added, the producting  of combustible gasses are CO = 52.76 % v, H 2 = 23.46 % v, CH 4 , = 3.23 % v