基于方槽的新型频率可重构微带贴片天线

G. Singh, M. Kumar
{"title":"基于方槽的新型频率可重构微带贴片天线","authors":"G. Singh, M. Kumar","doi":"10.1109/CSNT.2012.15","DOIUrl":null,"url":null,"abstract":"In this paper, a novel frequency reconfigurable antenna design and development is proposed for wireless devices. In the proposed design, a rectangular patch antenna with square slot using two PIN diodes at the centre frequency 10 GHz was designed and simulated frequency reconfiguration is achieved in the frequency range of 10-10.5 GHz and the measured results shows the same effect in the frequency range of 10.216-10.552 GHz. The frequency reconfiguration is carried out by switching the diodes on/off states. In the fabricated structure of proposed geometry the diodes are replaced by micro strip line for on-state as an ideal case. The antenna is designed on FR4 substrate (εr= 4.54) of thickness (H) 1.6 mm. The proposed structure was simulated by using the electromagnetic (EM) simulation software. The optimized structure was fabricated using microwave integrated circuit (MIC) techniques on same substrate. The return loss was measured using the Vector Network Analyzer. The simulated and measured return loss shows the close agreement.","PeriodicalId":174433,"journal":{"name":"2012 International Conference on Communication Systems and Network Technologies","volume":"11 4","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-05-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"9","resultStr":"{\"title\":\"Novel Frequency Reconfigurable Microstrip Patch Antenna Based on a Square Slot for Wireless Devices\",\"authors\":\"G. Singh, M. Kumar\",\"doi\":\"10.1109/CSNT.2012.15\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, a novel frequency reconfigurable antenna design and development is proposed for wireless devices. In the proposed design, a rectangular patch antenna with square slot using two PIN diodes at the centre frequency 10 GHz was designed and simulated frequency reconfiguration is achieved in the frequency range of 10-10.5 GHz and the measured results shows the same effect in the frequency range of 10.216-10.552 GHz. The frequency reconfiguration is carried out by switching the diodes on/off states. In the fabricated structure of proposed geometry the diodes are replaced by micro strip line for on-state as an ideal case. The antenna is designed on FR4 substrate (εr= 4.54) of thickness (H) 1.6 mm. The proposed structure was simulated by using the electromagnetic (EM) simulation software. The optimized structure was fabricated using microwave integrated circuit (MIC) techniques on same substrate. The return loss was measured using the Vector Network Analyzer. The simulated and measured return loss shows the close agreement.\",\"PeriodicalId\":174433,\"journal\":{\"name\":\"2012 International Conference on Communication Systems and Network Technologies\",\"volume\":\"11 4\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-05-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"9\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2012 International Conference on Communication Systems and Network Technologies\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CSNT.2012.15\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 International Conference on Communication Systems and Network Technologies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CSNT.2012.15","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 9

摘要

本文提出了一种用于无线设备的新型频率可重构天线的设计与开发。设计了一种中心频率为10 GHz的矩形方槽贴片天线,在10-10.5 GHz频率范围内实现了模拟频率重构,在10.216-10.552 GHz频率范围内的实测结果也显示了相同的效果。频率重构是通过开关二极管的开/关状态来实现的。在所提出的几何形状的制造结构中,理想情况下二极管被微带线取代。天线设计在厚度(H) 1.6 mm的FR4衬底(εr= 4.54)上。利用电磁仿真软件对所提出的结构进行了仿真。利用微波集成电路(MIC)技术在同一衬底上制作了优化后的结构。利用矢量网络分析仪测量回波损耗。模拟回波损耗与实测回波损耗非常吻合。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Novel Frequency Reconfigurable Microstrip Patch Antenna Based on a Square Slot for Wireless Devices
In this paper, a novel frequency reconfigurable antenna design and development is proposed for wireless devices. In the proposed design, a rectangular patch antenna with square slot using two PIN diodes at the centre frequency 10 GHz was designed and simulated frequency reconfiguration is achieved in the frequency range of 10-10.5 GHz and the measured results shows the same effect in the frequency range of 10.216-10.552 GHz. The frequency reconfiguration is carried out by switching the diodes on/off states. In the fabricated structure of proposed geometry the diodes are replaced by micro strip line for on-state as an ideal case. The antenna is designed on FR4 substrate (εr= 4.54) of thickness (H) 1.6 mm. The proposed structure was simulated by using the electromagnetic (EM) simulation software. The optimized structure was fabricated using microwave integrated circuit (MIC) techniques on same substrate. The return loss was measured using the Vector Network Analyzer. The simulated and measured return loss shows the close agreement.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书