A 2D lightweight instrumented wheel for assessing wheelchair functionality/activity.

Introduction: Force measurement wheels are essential instruments for analysing manual wheelchair propulsion. Existing solutions are heavy and bulky, influence propulsion biomechanics, and are limited to confined laboratory environments. In this paper, a novel design for a compact and lightweight measurement wheel is presented and statically validated.

Methods: Four connectors between the push-rim and wheel-rim doubled as force sensors to allow the calculation of tangential and radial forces as well as the point of force application. For validation, increasing weights were hung on the push-rim at known positions. Resulting values were compared against pre-determined force components.

Results: The implemented prototype weighed 2.1 kg and was able to transmit signals to a mobile recording device at 140 Hz. Errors in forces at locations of propulsive pushes were in the range up to ±3.1 N but higher at the frontal extreme. Tangential force components were most accurate.

Conclusion: The principle of instrumenting the joints between push-rim and wheel-rim shows promise for assessing wheelchair propulsion in daily life.