Performance of hybrid gelatin-PVA bioinks integrated with genipin through extrusion-based 3D bioprinting: An in vitro evaluation using human dermal fibroblasts.

IF 6.8 3区 医学 Q1 ENGINEERING, BIOMEDICAL
International Journal of Bioprinting Pub Date : 2023-02-07 eCollection Date: 2023-01-01 DOI:10.18063/ijb.677
Syafira Masri, Manira Maarof, Izhar Abd Aziz, Ruszymah Idrus, Mh Busra Fauzi
{"title":"Performance of hybrid gelatin-PVA bioinks integrated with genipin through extrusion-based 3D bioprinting: An <i>in vitro</i> evaluation using human dermal fibroblasts.","authors":"Syafira Masri, Manira Maarof, Izhar Abd Aziz, Ruszymah Idrus, Mh Busra Fauzi","doi":"10.18063/ijb.677","DOIUrl":null,"url":null,"abstract":"<p><p>3D bioprinting technology is a well-established and promising advanced fabrication technique that utilizes potential biomaterials as bioinks to replace lost skin and promote new tissue regeneration. Cutaneous regenerative biomaterials are highly commended since they benefit patients with larger wound sizes and irregular wound shapes compared to the painstaking split-skin graft. This study aimed to fabricate biocompatible, biodegradable, and printable bioinks as a cutaneous substitute that leads to newly formed tissue post-transplantation. Briefly, gelatin (GE) and polyvinyl alcohol (PVA) bioinks were prepared in various concentrations (w/v); GE (6% GE: 0% PVA), GPVA3 (6% GE: 3% PVA), and GPVA5 (6% GE: 5% PVA), followed by 0.1% (w/v) genipin (GNP) crosslinking to achieve optimum printability. According to the results, GPVA5_GNP significantly presented at least 590.93 ± 164.7% of swelling ratio capacity and optimal water vapor transmission rate (WVTR), which is <1500 g/m<sup>2</sup>/h to maintain the moisture of the wound microenvironment. Besides, GPVA5_GNP is also more durable than other hydrogels with the slowest biodegradation rate of 0.018 ± 0.08 mg/h. The increasing amount of PVA improved the rheological properties of the hydrogels, leading the GPVA5_GNP to have the highest viscosity, around 3.0 ± 0.06 Pa.s. It allows a better performance of bioinks printability via extrusion technique. Moreover, the cross-section of the microstructure hydrogels showed the average pore sizes >100 μm with excellent interconnected porosity. X-ray diffraction (XRD) analysis showed that the hydrogels maintain their amorphous properties and were well-distributed through energy dispersive X-ray after crosslinking. Furthermore, there had no substantial functional group changes, as observed by Fourier transform infrared spectroscopy, after the addition of crosslinker. In addition, GPVA hydrogels were biocompatible to the cells, effectively demonstrating >90% of cell viability. In conclusion, GPVA hydrogels crosslinked with GNP, as prospective bioinks, exhibited the superior properties necessary for wound healing treatment.</p>","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":"9 3","pages":"677"},"PeriodicalIF":6.8000,"publicationDate":"2023-02-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ftp.ncbi.nlm.nih.gov/pub/pmc/oa_pdf/34/de/IJB-9-3-677.PMC10236347.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Bioprinting","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.18063/ijb.677","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2023/1/1 0:00:00","PubModel":"eCollection","JCR":"Q1","JCRName":"ENGINEERING, BIOMEDICAL","Score":null,"Total":0}
引用次数: 0

Abstract

3D bioprinting technology is a well-established and promising advanced fabrication technique that utilizes potential biomaterials as bioinks to replace lost skin and promote new tissue regeneration. Cutaneous regenerative biomaterials are highly commended since they benefit patients with larger wound sizes and irregular wound shapes compared to the painstaking split-skin graft. This study aimed to fabricate biocompatible, biodegradable, and printable bioinks as a cutaneous substitute that leads to newly formed tissue post-transplantation. Briefly, gelatin (GE) and polyvinyl alcohol (PVA) bioinks were prepared in various concentrations (w/v); GE (6% GE: 0% PVA), GPVA3 (6% GE: 3% PVA), and GPVA5 (6% GE: 5% PVA), followed by 0.1% (w/v) genipin (GNP) crosslinking to achieve optimum printability. According to the results, GPVA5_GNP significantly presented at least 590.93 ± 164.7% of swelling ratio capacity and optimal water vapor transmission rate (WVTR), which is <1500 g/m2/h to maintain the moisture of the wound microenvironment. Besides, GPVA5_GNP is also more durable than other hydrogels with the slowest biodegradation rate of 0.018 ± 0.08 mg/h. The increasing amount of PVA improved the rheological properties of the hydrogels, leading the GPVA5_GNP to have the highest viscosity, around 3.0 ± 0.06 Pa.s. It allows a better performance of bioinks printability via extrusion technique. Moreover, the cross-section of the microstructure hydrogels showed the average pore sizes >100 μm with excellent interconnected porosity. X-ray diffraction (XRD) analysis showed that the hydrogels maintain their amorphous properties and were well-distributed through energy dispersive X-ray after crosslinking. Furthermore, there had no substantial functional group changes, as observed by Fourier transform infrared spectroscopy, after the addition of crosslinker. In addition, GPVA hydrogels were biocompatible to the cells, effectively demonstrating >90% of cell viability. In conclusion, GPVA hydrogels crosslinked with GNP, as prospective bioinks, exhibited the superior properties necessary for wound healing treatment.

Abstract Image

Abstract Image

Abstract Image

通过基于挤压的三维生物打印技术实现明胶-PVA 混合生物墨水与基因素的整合:利用人体真皮成纤维细胞进行体外评估。
三维生物打印技术是一种成熟且前景广阔的先进制造技术,它利用潜在的生物材料作为生物墨水来替代失去的皮肤并促进新组织的再生。皮肤再生生物材料备受推崇,因为与费力的分割皮肤移植相比,它能使伤口面积更大、伤口形状不规则的患者受益。本研究旨在制造生物相容性好、可生物降解、可印刷的生物墨水,作为皮肤替代物,在移植后形成新的组织。简而言之,我们制备了不同浓度(w/v)的明胶(GE)和聚乙烯醇(PVA)生物墨水:GE(6% GE:0% PVA)、GPVA3(6% GE:3% PVA)和 GPVA5(6% GE:5% PVA),然后用 0.1%(w/v)的基因素(GNP)交联,以获得最佳的可印刷性。结果表明,GPVA5_GNP 显著提高了至少 590.93 ± 164.7% 的膨胀率能力和最佳水蒸气透过率(WVTR),即 2/h,以保持伤口微环境的湿度。此外,GPVA5_GNP 比其他水凝胶更耐久,生物降解速度最慢,为 0.018 ± 0.08 mg/h。增加 PVA 的用量可改善水凝胶的流变特性,使 GPVA5_GNP 的粘度最高,约为 3.0 ± 0.06 Pa.s。此外,微结构水凝胶的横截面显示平均孔径大于 100 μm,具有极佳的互联孔隙度。X 射线衍射(XRD)分析表明,交联后的水凝胶保持了无定形特性,并通过能量色散 X 射线进行了良好的分布。此外,通过傅立叶变换红外光谱观察,在加入交联剂后,水凝胶的官能团没有发生实质性变化。此外,GPVA 水凝胶对细胞具有生物相容性,细胞存活率大于 90%。总之,与 GNP 交联的 GPVA 水凝胶作为前瞻性生物链接物,具有伤口愈合治疗所需的优异特性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
6.90
自引率
4.80%
发文量
81
期刊介绍: The International Journal of Bioprinting is a globally recognized publication that focuses on the advancements, scientific discoveries, and practical implementations of Bioprinting. Bioprinting, in simple terms, involves the utilization of 3D printing technology and materials that contain living cells or biological components to fabricate tissues or other biotechnological products. Our journal encompasses interdisciplinary research that spans across technology, science, and clinical applications within the expansive realm of Bioprinting.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信