Experimental study on the reaction kinetics of char combustion in a pressurized O2/H2O atmosphere

IF 7.2 2区 工程技术 Q1 CHEMISTRY, APPLIED
Chenxi Bai, Kun Chen, Wenda Zhang, Yukai Li, Bowen Li, Yijun Zhao, Shaozeng Sun, Dongdong Feng
{"title":"Experimental study on the reaction kinetics of char combustion in a pressurized O2/H2O atmosphere","authors":"Chenxi Bai,&nbsp;Kun Chen,&nbsp;Wenda Zhang,&nbsp;Yukai Li,&nbsp;Bowen Li,&nbsp;Yijun Zhao,&nbsp;Shaozeng Sun,&nbsp;Dongdong Feng","doi":"10.1016/j.fuproc.2023.107991","DOIUrl":null,"url":null,"abstract":"<div><p>Pressurized O<sub>2</sub>/H<sub>2</sub>O combustion is a potential CCS technology. In this study, a pressurized horizontal furnace was used to prepare pyrolysis char under pressurized inert atmosphere, and then a pressurized drop tube furnace was used to carry out char combustion under pressurized O<sub>2</sub>/H<sub>2</sub>O atmosphere (5% O<sub>2</sub>, 20% H<sub>2</sub>O) at the same pressure and temperature as the pyrolysis process. The carbon conversion of char under different pressures (0.4/0.7/1.0 MPa), temperatures (900/950/1000 °C), and residence time (1.38/2.76/4.14 s) was studied by proximate analysis. The random pore model was used to calculate reaction kinetic parameters of char combustion at different pressures. The results show that when the pressure increased from 0.4 MPa to 0.7 MPa, the carbon conversion increased significantly, with the increment reaching up to 9.90 percentage points. The marginal diminishing effect became significant when the pressure was greater than 0.7 MPa. The reaction activation energy and pre-exponential factor at 0.4/0.7/1.0 MPa were 66.53/66.29/35.79 kJ/mol and 20.54/36.84/1.69 s<sup>−1</sup>, respectively.</p></div>","PeriodicalId":326,"journal":{"name":"Fuel Processing Technology","volume":"252 ","pages":"Article 107991"},"PeriodicalIF":7.2000,"publicationDate":"2023-11-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Fuel Processing Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0378382023003399","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
引用次数: 0

Abstract

Pressurized O2/H2O combustion is a potential CCS technology. In this study, a pressurized horizontal furnace was used to prepare pyrolysis char under pressurized inert atmosphere, and then a pressurized drop tube furnace was used to carry out char combustion under pressurized O2/H2O atmosphere (5% O2, 20% H2O) at the same pressure and temperature as the pyrolysis process. The carbon conversion of char under different pressures (0.4/0.7/1.0 MPa), temperatures (900/950/1000 °C), and residence time (1.38/2.76/4.14 s) was studied by proximate analysis. The random pore model was used to calculate reaction kinetic parameters of char combustion at different pressures. The results show that when the pressure increased from 0.4 MPa to 0.7 MPa, the carbon conversion increased significantly, with the increment reaching up to 9.90 percentage points. The marginal diminishing effect became significant when the pressure was greater than 0.7 MPa. The reaction activation energy and pre-exponential factor at 0.4/0.7/1.0 MPa were 66.53/66.29/35.79 kJ/mol and 20.54/36.84/1.69 s−1, respectively.

加压O2/H2O气氛中炭燃烧反应动力学的实验研究
加压O2/H2O燃烧是一种很有潜力的CCS技术。本研究采用加压卧式炉在加压惰性气氛下制备热解炭,然后采用加压降管式炉在与热解过程相同的压力和温度下,在加压O2/H2O气氛(5% O2, 20% H2O)下进行炭的燃烧。通过近似分析研究了不同压力(0.4/0.7/1.0 MPa)、温度(900/950/1000℃)和停留时间(1.38/2.76/4.14 s)下炭的碳转化情况。采用随机孔隙模型计算了不同压力下炭燃烧的反应动力学参数。结果表明,当压力从0.4 MPa增加到0.7 MPa时,碳转化率显著提高,增幅可达9.90个百分点。当压力大于0.7 MPa时,边际递减效应显著。在0.4/0.7/1.0 MPa下,反应活化能和指前因子分别为66.53/66.29/35.79 kJ/mol和20.54/36.84/1.69 s−1。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Fuel Processing Technology
Fuel Processing Technology 工程技术-工程:化工
CiteScore
13.20
自引率
9.30%
发文量
398
审稿时长
26 days
期刊介绍: Fuel Processing Technology (FPT) deals with the scientific and technological aspects of converting fossil and renewable resources to clean fuels, value-added chemicals, fuel-related advanced carbon materials and by-products. In addition to the traditional non-nuclear fossil fuels, biomass and wastes, papers on the integration of renewables such as solar and wind energy and energy storage into the fuel processing processes, as well as papers on the production and conversion of non-carbon-containing fuels such as hydrogen and ammonia, are also welcome. While chemical conversion is emphasized, papers on advanced physical conversion processes are also considered for publication in FPT. Papers on the fundamental aspects of fuel structure and properties will also be considered.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信