Clothing Effect on Multilayered Skin Model Exposure From 20 GHz to 100 GHz

IF 3 Q2 ENGINEERING, ELECTRICAL & ELECTRONIC
Kun Li;Kensuke Sasaki;Giulia Sacco;Maxim Zhadobov
{"title":"Clothing Effect on Multilayered Skin Model Exposure From 20 GHz to 100 GHz","authors":"Kun Li;Kensuke Sasaki;Giulia Sacco;Maxim Zhadobov","doi":"10.1109/JERM.2023.3309935","DOIUrl":null,"url":null,"abstract":"This study presents a statistical assessment of clothed human skin model exposure from 20 to 100 GHz. Dielectric property data for two typical textile materials, i.e., cotton and wool, were provided for the first time over the entire frequency range. A statistical analysis of the ratio of absorbed power density (APD) to skin temperature elevation was performed by Monte Carlo simulations using a multi-layer skin model with a textile layer. Three key parameters, namely the angle of incidence, cross-polarization power ratio (\n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n), and air gap spacing between cloth and skin surface, were considered in the dosimetry analysis. The results show that at an incidence angle up to 60\n<inline-formula><tex-math>$^\\circ$</tex-math></inline-formula>\n, fluctuations of the ratio are observed by varying \n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n from \n<inline-formula><tex-math>$-$</tex-math></inline-formula>\n50 to 50 dB. In the 20–100 GHz range, when the \n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n is less than 0 dB, i.e., horizontally polarized wave is dominant, the impact on the ratio caused by either the incident angle or the air gap spacing is marginal. The deviation is increased when \n<inline-formula><tex-math>$\\bm {XPR}$</tex-math></inline-formula>\n exceeds 0 dB, i.e., vertically polarized wave is dominant, especially above 60 GHz at the incidence angles above 60\n<inline-formula><tex-math>$^\\circ$</tex-math></inline-formula>\n.","PeriodicalId":29955,"journal":{"name":"IEEE Journal of Electromagnetics RF and Microwaves in Medicine and Biology","volume":"7 4","pages":"408-415"},"PeriodicalIF":3.0000,"publicationDate":"2023-09-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Journal of Electromagnetics RF and Microwaves in Medicine and Biology","FirstCategoryId":"1085","ListUrlMain":"https://ieeexplore.ieee.org/document/10242065/","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0

Abstract

This study presents a statistical assessment of clothed human skin model exposure from 20 to 100 GHz. Dielectric property data for two typical textile materials, i.e., cotton and wool, were provided for the first time over the entire frequency range. A statistical analysis of the ratio of absorbed power density (APD) to skin temperature elevation was performed by Monte Carlo simulations using a multi-layer skin model with a textile layer. Three key parameters, namely the angle of incidence, cross-polarization power ratio ( $\bm {XPR}$ ), and air gap spacing between cloth and skin surface, were considered in the dosimetry analysis. The results show that at an incidence angle up to 60 $^\circ$ , fluctuations of the ratio are observed by varying $\bm {XPR}$ from $-$ 50 to 50 dB. In the 20–100 GHz range, when the $\bm {XPR}$ is less than 0 dB, i.e., horizontally polarized wave is dominant, the impact on the ratio caused by either the incident angle or the air gap spacing is marginal. The deviation is increased when $\bm {XPR}$ exceeds 0 dB, i.e., vertically polarized wave is dominant, especially above 60 GHz at the incidence angles above 60 $^\circ$ .
服装对多层皮肤模型暴露的影响从20 GHz到100 GHz
本研究提出了一个统计评估的穿着人体皮肤模型暴露在20至100 GHz。首次提供了棉花和羊毛两种典型纺织材料在整个频率范围内的介电性能数据。利用带纺织层的多层皮肤模型,通过蒙特卡罗模拟对吸收功率密度(APD)与皮肤温度升高的比值进行了统计分析。在剂量学分析中考虑了三个关键参数,即入射角、交叉极化功率比($\bm {XPR}$)和布料与皮肤表面的气隙间距。结果表明,当入射角为60$^\circ$时,在$ $-$50到$ $50 dB范围内改变$ $ bm {XPR}$,可以观察到该比值的波动。在20 ~ 100 GHz范围内,当$\bm {XPR}$ < 0 dB,即以水平极化波为主时,入射角和气隙间距对比值的影响都很小。当$\bm {XPR}$超过0 dB时,偏差增大,即垂直极化波占主导地位,特别是在60 GHz以上,入射角大于60$^\circ$。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
5.80
自引率
9.40%
发文量
58
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信