Characterization of Potential Pollutants from Poly(lactic acid) after the Degradation Process in Soil under Simulated Environmental Conditions

Abstract

In recent years, the amount of produced petrochemical plastic waste has been growing at an alarming rate. According to the Plastics Europe Market Research Group (PEMRG)/Conversio Market & Strategy GmbH, in 2018 the global production of plastics amounts to 359 million tons, and in Europe—61.8 million tons. More than 80% of all marine litter is plastic, which accumulates in the environment due to its durability. Due to the growing problem, biodegradable polymer products are introduced to the market. Therefore, it is necessary to conduct research on degradation products in order to estimate the risk arising from their presence in the environment. This paper discusses research on compounds that may potentially remain in the soil after the degradation of the double green PLA polymer. The aim of the research was to prove whether products made of PLA, e.g., packaging, films and other waste can release substances harmful to the environment. Therefore, soil was selected as a medium to characterize the substances potentially released from the polymer under conditions simulating the degradation process in the environment. The soil was always used from the same producer. Before the polymer biodegradation process, it was additionally checked for pH, C and N content, number of microorganisms, etc. PLA degradation in soil was carried out in a laboratory accredited by the Polish Accreditation Center (PCA). During the research, soil samples at various stages of the degradation process under laboratory conditions were subjected to both extraction in an aqueous environment and organic solvent extraction The studies used the gas chromatography coupled with mass spectrometry (GC/MS), as well as pyrolysis gas chromatography (Py-GC/MS). In addition, the study used the gel permeation chromatography (GPC/SEC) allowing to determine the distribution of molar masses, average molar masses and polydispersity, and the infrared spectroscopy (FTIR).