Влияние условий роста МЛЭ на кинетику сближения ступеней поверхности Si(100)

М Ю Есин, В. А. Тимофеев, А. И. Никифоров
{"title":"Влияние условий роста МЛЭ на кинетику сближения ступеней поверхности Si(100)","authors":"М Ю Есин, В. А. Тимофеев, А. И. Никифоров","doi":"10.34077/silicon2022-104","DOIUrl":null,"url":null,"abstract":"\n In this work, the convergence kinetics investigations of the SA and SB steps on Si(100) substrates with inclination 0.5o and 0.1o were carried out. Analysis of the time dependence of reflection high-energy electron diffraction (RHEED) intensity was used to establish the growth kinetics character on vicinal Si(100) surfaces. It is shown that, in a Si flow at the growth rate of 0.37 ML/s, the step convergence velocity has a decreasing exponential dependence with the temperature increase. It is determined that the single-domain surface formation velocity increases with an increase in the terrace width on the surface, which may be due to the partial participation of growth due to the formation of two-dimensional islands. Above a temperature of 650°C, the dominant growth mode is due to the step movement and the single-domain surface formation velocity decreases with an increase in the terrace width. Thus, the single-layer step convergence is determined by both the MBE growth conditions and the Si(100) substrate orientation. The convergence of SA and SB steps of the Si(100) surface is explained by the slowdown of the step SA motion, which is associated with complex permeability mechanisms and a kink formation of steps. It is assumed that the reason for the slowdown of the step convergence with increasing temperature is an increase in the kink density at the SA step, which reduces the step SA permeability coefficient.\n","PeriodicalId":32503,"journal":{"name":"Sel''skokhoziaistvennye mashiny i tekhnologii","volume":"121 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-09-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sel''skokhoziaistvennye mashiny i tekhnologii","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.34077/silicon2022-104","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In this work, the convergence kinetics investigations of the SA and SB steps on Si(100) substrates with inclination 0.5o and 0.1o were carried out. Analysis of the time dependence of reflection high-energy electron diffraction (RHEED) intensity was used to establish the growth kinetics character on vicinal Si(100) surfaces. It is shown that, in a Si flow at the growth rate of 0.37 ML/s, the step convergence velocity has a decreasing exponential dependence with the temperature increase. It is determined that the single-domain surface formation velocity increases with an increase in the terrace width on the surface, which may be due to the partial participation of growth due to the formation of two-dimensional islands. Above a temperature of 650°C, the dominant growth mode is due to the step movement and the single-domain surface formation velocity decreases with an increase in the terrace width. Thus, the single-layer step convergence is determined by both the MBE growth conditions and the Si(100) substrate orientation. The convergence of SA and SB steps of the Si(100) surface is explained by the slowdown of the step SA motion, which is associated with complex permeability mechanisms and a kink formation of steps. It is assumed that the reason for the slowdown of the step convergence with increasing temperature is an increase in the kink density at the SA step, which reduces the step SA permeability coefficient.
本文研究了SA和SB台阶在倾角分别为0.5和0.1的Si(100)衬底上的收敛动力学。利用反射高能电子衍射(RHEED)强度的时间依赖性分析,建立了邻近Si(100)表面的生长动力学特征。结果表明,在生长速率为0.37 ML/s的Si流中,阶跃收敛速度随温度的升高呈指数递减关系。确定单畴表面形成速度随表面阶地宽度的增加而增加,这可能是由于二维岛屿的形成部分参与了生长。在650℃以上,随着台阶宽度的增大,单畴表面形成速度减小,以台阶运动为主。因此,单层阶跃收敛是由MBE生长条件和Si(100)衬底取向共同决定的。Si(100)表面SA阶跃和SB阶跃的收敛可以用台阶SA运动的减缓来解释,这与复杂的渗透机制和台阶的扭结形成有关。假设阶跃收敛速度随温度升高而减慢的原因是在SA阶跃处的扭结密度增加,从而降低了阶跃SA渗透系数。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
35
审稿时长
8 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信