A four-stage yield optimization technique for analog integrated circuits using optimal computing budget allocation and evolutionary algorithms

IF 1.1 4区 计算机科学 Q4 COMPUTER SCIENCE, HARDWARE & ARCHITECTURE
Abbas Yaseri, Mohammad Hossein Maghami, Mehdi Radmehr
{"title":"A four-stage yield optimization technique for analog integrated circuits using optimal computing budget allocation and evolutionary algorithms","authors":"Abbas Yaseri,&nbsp;Mohammad Hossein Maghami,&nbsp;Mehdi Radmehr","doi":"10.1049/cdt2.12048","DOIUrl":null,"url":null,"abstract":"<p>A high yield estimation is necessary for designing analogue integrated circuits. In the Monte-Carlo (MC) method, many transistor-level simulations should be performed to obtain the desired result. Therefore, some methods are needed to be combined with MC simulations to reach high yield with high speed at the same time. In this paper, a four-stage yield optimisation approach is presented, which employs computational intelligence to accelerate yield estimation without losing accuracy. Firstly, the designs that met the desired characteristics are provided using critical analysis (CA). The aim of utilising CA is to avoid unnecessary MC simulations repeating for non-critical solutions. Then in the second and third stages, the shuffled frog-leaping algorithm and the Non-dominated Sorting Genetic Algorithm-III are proposed to improve the performance. Finally, MC simulations are performed to present the final result. The yield value obtained from the simulation results for two-stage class-AB Operational Transconductance Amplifer (OTA) in 180 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology is 99.85%. The proposed method has less computational effort and high accuracy than the MC-based approaches. Another advantage of using CA is that the initial population of multi-objective optimisation algorithms will no longer be random. Simulation results prove the efficiency of the proposed technique.</p>","PeriodicalId":50383,"journal":{"name":"IET Computers and Digital Techniques","volume":"16 5-6","pages":"183-195"},"PeriodicalIF":1.1000,"publicationDate":"2022-10-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ietresearch.onlinelibrary.wiley.com/doi/epdf/10.1049/cdt2.12048","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IET Computers and Digital Techniques","FirstCategoryId":"94","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1049/cdt2.12048","RegionNum":4,"RegionCategory":"计算机科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"COMPUTER SCIENCE, HARDWARE & ARCHITECTURE","Score":null,"Total":0}
引用次数: 2

Abstract

A high yield estimation is necessary for designing analogue integrated circuits. In the Monte-Carlo (MC) method, many transistor-level simulations should be performed to obtain the desired result. Therefore, some methods are needed to be combined with MC simulations to reach high yield with high speed at the same time. In this paper, a four-stage yield optimisation approach is presented, which employs computational intelligence to accelerate yield estimation without losing accuracy. Firstly, the designs that met the desired characteristics are provided using critical analysis (CA). The aim of utilising CA is to avoid unnecessary MC simulations repeating for non-critical solutions. Then in the second and third stages, the shuffled frog-leaping algorithm and the Non-dominated Sorting Genetic Algorithm-III are proposed to improve the performance. Finally, MC simulations are performed to present the final result. The yield value obtained from the simulation results for two-stage class-AB Operational Transconductance Amplifer (OTA) in 180 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology is 99.85%. The proposed method has less computational effort and high accuracy than the MC-based approaches. Another advantage of using CA is that the initial population of multi-objective optimisation algorithms will no longer be random. Simulation results prove the efficiency of the proposed technique.

Abstract Image

基于最优计算预算分配和进化算法的模拟集成电路四阶段成品率优化技术
在模拟集成电路的设计中,高良率估计是必要的。在蒙特卡罗(MC)方法中,为了获得期望的结果,需要进行许多晶体管级的模拟。因此,需要一些方法与MC模拟相结合,以达到高成品率和高速度的同时。本文提出了一种四阶段产量优化方法,该方法利用计算智能在不损失精度的情况下加速产量估计。首先,使用关键分析(CA)提供满足所需特性的设计。利用CA的目的是避免不必要的MC模拟重复非关键的解决方案。在第二阶段和第三阶段,分别提出了shuffle frog- jump算法和non - dominant Sorting Genetic algorithm - iii来提高算法的性能。最后进行了MC模拟,给出了最终结果。仿真结果表明,180nm互补金属氧化物半导体(CMOS)工艺的两级ab类操作跨导放大器(OTA)的良率值为99.85%。与基于mc的方法相比,该方法计算量少,精度高。使用CA的另一个优点是多目标优化算法的初始人口将不再是随机的。仿真结果证明了该方法的有效性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
IET Computers and Digital Techniques
IET Computers and Digital Techniques 工程技术-计算机:理论方法
CiteScore
3.50
自引率
0.00%
发文量
12
审稿时长
>12 weeks
期刊介绍: IET Computers & Digital Techniques publishes technical papers describing recent research and development work in all aspects of digital system-on-chip design and test of electronic and embedded systems, including the development of design automation tools (methodologies, algorithms and architectures). Papers based on the problems associated with the scaling down of CMOS technology are particularly welcome. It is aimed at researchers, engineers and educators in the fields of computer and digital systems design and test. The key subject areas of interest are: Design Methods and Tools: CAD/EDA tools, hardware description languages, high-level and architectural synthesis, hardware/software co-design, platform-based design, 3D stacking and circuit design, system on-chip architectures and IP cores, embedded systems, logic synthesis, low-power design and power optimisation. Simulation, Test and Validation: electrical and timing simulation, simulation based verification, hardware/software co-simulation and validation, mixed-domain technology modelling and simulation, post-silicon validation, power analysis and estimation, interconnect modelling and signal integrity analysis, hardware trust and security, design-for-testability, embedded core testing, system-on-chip testing, on-line testing, automatic test generation and delay testing, low-power testing, reliability, fault modelling and fault tolerance. Processor and System Architectures: many-core systems, general-purpose and application specific processors, computational arithmetic for DSP applications, arithmetic and logic units, cache memories, memory management, co-processors and accelerators, systems and networks on chip, embedded cores, platforms, multiprocessors, distributed systems, communication protocols and low-power issues. Configurable Computing: embedded cores, FPGAs, rapid prototyping, adaptive computing, evolvable and statically and dynamically reconfigurable and reprogrammable systems, reconfigurable hardware. Design for variability, power and aging: design methods for variability, power and aging aware design, memories, FPGAs, IP components, 3D stacking, energy harvesting. Case Studies: emerging applications, applications in industrial designs, and design frameworks.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信