Floatability and calculated reactivity of sulfide minerals and gold

IF 0.6 4区 材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING
V. Ignatkina, A. Kayumov, N. D. Yergesheva
{"title":"Floatability and calculated reactivity of sulfide minerals and gold","authors":"V. Ignatkina, A. Kayumov, N. D. Yergesheva","doi":"10.17073/0021-3438-2022-4-4-14","DOIUrl":null,"url":null,"abstract":"The paper provides the results of theoretical reactivity calculations for gold, molybdenum, stibnite, galena, chalcopyrite, arsenopyrite and pyrite in comparison with such experimental data as the floatability of monomineral fractions with butyl xanthate, wetting angle values, changes in the kinetics of the mineral electrode potential. The following calculation series in terms of reactivity and oxidizing ability were established by calculation: Au < Sb2S3 < MoS2 < PbS < CuFeS2 < FeAsS < FeS2. During the Hallimond tube flotation, natural gold grains demonstrated the highest recovery (70 %) in the рН = 5÷7 range compared to all the studied sulfides. Molybdenite and stibnite are floated at the level of 50 % under the same conditions. As pH increases towards the alkaline region, a decrease in the floatability of all sulfides except for chalcopyrite is observed. It was established that the highest recovery is achieved when the required time of conditioning with the collector is the inverse of their reactivity. The measured wetting angle of a drop of water on an untreated surface has the highest value (78°) for a gold plate, and the lowest one (67°) for pyrite, but the latter features the greatest increase in the wetting angle (by 15°) after treatment with butyl xanthate at a concentration of 10–4 mol/l and pH = 6. For molybdenite, treatment with butyl xanthate has practically no effect on the measured wetting angle. The Sb2S3 < PbS < CuFeS2 < FeAsS < FeS2 series is determined according to the electrode potential in the рН = 2.0÷5.6 range. Theoretical calculations and experimental data obtained when studying monofractions of sulfides and gold showed that experimental conditions (pH, conditioning time, collector concentration) significantly affect the floatability. The calculated reactivity of chemical sulfide compounds and gold in comparison with experimental results proved the importance of maintaining certain flotation conditions to create contrast in the floatability of minerals.","PeriodicalId":765,"journal":{"name":"Russian Journal of Non-Ferrous Metals","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2022-08-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Russian Journal of Non-Ferrous Metals","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.17073/0021-3438-2022-4-4-14","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

The paper provides the results of theoretical reactivity calculations for gold, molybdenum, stibnite, galena, chalcopyrite, arsenopyrite and pyrite in comparison with such experimental data as the floatability of monomineral fractions with butyl xanthate, wetting angle values, changes in the kinetics of the mineral electrode potential. The following calculation series in terms of reactivity and oxidizing ability were established by calculation: Au < Sb2S3 < MoS2 < PbS < CuFeS2 < FeAsS < FeS2. During the Hallimond tube flotation, natural gold grains demonstrated the highest recovery (70 %) in the рН = 5÷7 range compared to all the studied sulfides. Molybdenite and stibnite are floated at the level of 50 % under the same conditions. As pH increases towards the alkaline region, a decrease in the floatability of all sulfides except for chalcopyrite is observed. It was established that the highest recovery is achieved when the required time of conditioning with the collector is the inverse of their reactivity. The measured wetting angle of a drop of water on an untreated surface has the highest value (78°) for a gold plate, and the lowest one (67°) for pyrite, but the latter features the greatest increase in the wetting angle (by 15°) after treatment with butyl xanthate at a concentration of 10–4 mol/l and pH = 6. For molybdenite, treatment with butyl xanthate has practically no effect on the measured wetting angle. The Sb2S3 < PbS < CuFeS2 < FeAsS < FeS2 series is determined according to the electrode potential in the рН = 2.0÷5.6 range. Theoretical calculations and experimental data obtained when studying monofractions of sulfides and gold showed that experimental conditions (pH, conditioning time, collector concentration) significantly affect the floatability. The calculated reactivity of chemical sulfide compounds and gold in comparison with experimental results proved the importance of maintaining certain flotation conditions to create contrast in the floatability of minerals.
硫化矿物与金的可浮性及计算反应性
本文给出了金、钼、辉锑矿、方铅矿、黄铜矿、毒砂和黄铁矿的理论反应性计算结果,并与单矿物组分与丁黄药的可浮性、润湿角值、矿物电极电位动力学变化等实验数据进行了比较。通过计算建立了反应性和氧化性的计算序列:Au < Sb2S3 < MoS2 < PbS < CuFeS2 < FeAsS < FeS2。在哈里蒙德管浮选过程中,天然金颗粒在рН = 5÷7范围内的回收率最高(70%)。辉钼矿和辉锑矿在相同条件下以50%的品位浮选。当pH值向碱性区域增加时,除黄铜矿外,所有硫化物的可浮性都降低。结果表明,当所需的捕收剂调理时间与反应性相反时,回收率最高。在未经处理的表面上,水滴的润湿角在金板上最大(78°),在黄铁矿上最小(67°),但在10-4 mol/l和pH = 6的条件下,丁基黄药处理后,黄铁矿的润湿角增加最多(15°)。对于辉钼矿,丁基黄药处理对测得的润湿角几乎没有影响。Sb2S3 < PbS < CuFeS2 < FeAsS < FeS2系列根据电极电位在рН = 2.0÷5.6范围内确定。理论计算和实验数据表明,实验条件(pH、调理时间、捕收剂浓度)对硫化金单组分的可浮性有显著影响。化学硫化物与金的反应性计算结果与实验结果相比较,证明了保持一定的浮选条件对形成矿物可浮性对比的重要性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Russian Journal of Non-Ferrous Metals
Russian Journal of Non-Ferrous Metals METALLURGY & METALLURGICAL ENGINEERING-
CiteScore
1.90
自引率
12.50%
发文量
59
审稿时长
3 months
期刊介绍: Russian Journal of Non-Ferrous Metals is a journal the main goal of which is to achieve new knowledge in the following topics: extraction metallurgy, hydro- and pirometallurgy, casting, plastic deformation, metallography and heat treatment, powder metallurgy and composites, self-propagating high-temperature synthesis, surface engineering and advanced protected coatings, environments, and energy capacity in non-ferrous metallurgy.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信