{"title":"Synthesis and Fabrication of Single Walled Carbon Nanotube Microelectrode Arrays on Flexible Probes for Neurotransmitter Detection","authors":"Sei Jin Park, Anna N. Ivanovskaya, A. Yorita","doi":"10.1115/msec2022-85273","DOIUrl":null,"url":null,"abstract":"\n Implantable microelectrode arrays are an effective method for understanding neurotransmitter dynamics with high spatial resolution. In particular, carbon-based electrodes are efficient for electrochemical detection of dopamine, a neurotransmitter studied for its role in motor movement and reward-seeking behavior. However, very few options exist for arrayed carbon microelectrodes, specifically on flexible polymeric probes. We demonstrate fabrication of polyimide probes featuring single walled carbon nanotube (SWCNT) microelectrode arrays and characterize their dopamine detection performance. First, SWCNT synthesis parameters were optimized to grow high density SWCNT “forests” that have uniform height with electrode diameters ranging from 15 μm to 100 μm, as these dimensions are spatially relevant to chemical sensing in an animal model. These SWCNT microelectrodes were then incorporated into a microfabrication process involving deposition and patterning of polyimide substrate and metal traces. The process flow was designed such that the polyimide was not exposed to the high temperatures required to grow SWCNTs. Instead, a bottom-up approach was utilized, in which the SWCNT catalyst was first patterned, the SWCNTs were synthesized on a silicon substrate, then polyimide and trace metal layers were deposited and patterned. Prototype probes were fabricated containing the same range of electrode diameters as those used for SWCNT synthesis development to determine the effect of electrode diameter on ease of microfabrication. Microelectrodes ranging from 15 μm to 50 μm in diameter were found to release from the carrier wafer more easily, while larger electrodes demonstrated poor release. These probes demonstrate a concentration-dependent response to dopamine, with high sensitivity compared to microelectrode arrays consisting of bare metal. Further development of this electrode material will enable neuroscientists to study dopamine at higher spatial resolution, with the benefit of utilizing flexible probes.","PeriodicalId":45459,"journal":{"name":"Journal of Micro and Nano-Manufacturing","volume":null,"pages":null},"PeriodicalIF":1.0000,"publicationDate":"2022-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Micro and Nano-Manufacturing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1115/msec2022-85273","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
引用次数: 0
Abstract
Implantable microelectrode arrays are an effective method for understanding neurotransmitter dynamics with high spatial resolution. In particular, carbon-based electrodes are efficient for electrochemical detection of dopamine, a neurotransmitter studied for its role in motor movement and reward-seeking behavior. However, very few options exist for arrayed carbon microelectrodes, specifically on flexible polymeric probes. We demonstrate fabrication of polyimide probes featuring single walled carbon nanotube (SWCNT) microelectrode arrays and characterize their dopamine detection performance. First, SWCNT synthesis parameters were optimized to grow high density SWCNT “forests” that have uniform height with electrode diameters ranging from 15 μm to 100 μm, as these dimensions are spatially relevant to chemical sensing in an animal model. These SWCNT microelectrodes were then incorporated into a microfabrication process involving deposition and patterning of polyimide substrate and metal traces. The process flow was designed such that the polyimide was not exposed to the high temperatures required to grow SWCNTs. Instead, a bottom-up approach was utilized, in which the SWCNT catalyst was first patterned, the SWCNTs were synthesized on a silicon substrate, then polyimide and trace metal layers were deposited and patterned. Prototype probes were fabricated containing the same range of electrode diameters as those used for SWCNT synthesis development to determine the effect of electrode diameter on ease of microfabrication. Microelectrodes ranging from 15 μm to 50 μm in diameter were found to release from the carrier wafer more easily, while larger electrodes demonstrated poor release. These probes demonstrate a concentration-dependent response to dopamine, with high sensitivity compared to microelectrode arrays consisting of bare metal. Further development of this electrode material will enable neuroscientists to study dopamine at higher spatial resolution, with the benefit of utilizing flexible probes.
期刊介绍:
The Journal of Micro and Nano-Manufacturing provides a forum for the rapid dissemination of original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers. Papers addressing special needs in emerging areas, such as biomedical devices, drug manufacturing, water and energy, are also encouraged. Areas of interest including, but not limited to: Unit micro- and nano-manufacturing processes; Hybrid manufacturing processes combining bottom-up and top-down processes; Hybrid manufacturing processes utilizing various energy sources (optical, mechanical, electrical, solar, etc.) to achieve multi-scale features and resolution; High-throughput micro- and nano-manufacturing processes; Equipment development; Predictive modeling and simulation of materials and/or systems enabling point-of-need or scaled-up micro- and nano-manufacturing; Metrology at the micro- and nano-scales over large areas; Sensors and sensor integration; Design algorithms for multi-scale manufacturing; Life cycle analysis; Logistics and material handling related to micro- and nano-manufacturing.