THE FORMATION OF THE ENVIRONMENT FOR GASEOUS CARBONIZING WHEN USING SOME DIFFERENT GASES

Q3 Engineering

Journal of Mechanical Engineering Research and Developments Pub Date : 2019-08-29 DOI:10.26480/jmerd.05.2019.38.41

L. Hoang, M. Chau

引用次数: 0

Abstract

In this paper, the results of an overview of the formation of carbon permeability when using a number of different permeable gases are presented. The most common permeable gases are “endo” gas and methanol. However, with conditions in Vietnam with an extremely abundant gas source, the use of imported gases will cause enormous waste. Therefore, in this study, we introduce the formation of the permeability medium of two “endo” and methanol gases. In addition, the authors also presented an analysis of the formation of seepage environments from Vietnamese gas sources. Research results show that the formation of permeability medium is suitable for imported gases. Experimental results show that the use of Vietnamese gas for permeability is of the same quality as imported gases.

查看原文本刊更多论文

当使用一些不同的气体时，气体碳化环境的形成

在本文中，概述了使用一些不同的可渗透气体时形成碳渗透性的结果。最常见的可渗透气体是“endo”气体和甲醇。然而，在越南天然气资源极其丰富的条件下，使用进口天然气将造成巨大的浪费。因此，在本研究中，我们介绍了两种“端多”和甲醇气体的渗透性介质的形成。此外，还对越南气源渗流环境的形成进行了分析。研究结果表明，渗透性介质的形成适合引入气体。试验结果表明，越南天然气的渗透性与进口天然气具有相同的质量。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Mechanical Engineering Research and Developments Engineering-Computational Mechanics

自引率

0.00%

发文量

审稿时长

9 weeks

期刊介绍： The scopes of the journal include, but are not limited to, the following topics: • Thermal Engineering and Fluids Engineering • Mechanics • Kinematics, Dynamics, & Control of Mechanical Systems • Mechatronics, Robotics and Automation • Design, Manufacturing, & Product Development • Human and Machine Haptics Specific topics of interest include: Advanced Manufacturing Technology, Analysis and Decision of Industry & Manufacturing System, Applied Mechanics, Biomechanics, CAD/CAM Integration Technology, Complex Curve Design, Manufacturing & Application, Computational Mechanics, Computer-aided Geometric Design & Simulation, Fluid Dynamics, Fluid Mechanics, General mechanics, Geomechanics, Industrial Application of CAD, Machinery and Machine Design, Machine Vision and Learning, Material Science and Processing, Mechanical Power Engineering, Mechatronics and Robotics, Artificial Intelligence, PC Guided Design and Manufacture, Precision Manufacturing & Measurement, Precision Mechanics, Production Technology, Quality & Reliability Engineering, Renewable Energy Technologies, Science and Engineering Computing, Solid Mechanics, Structural Dynamics, System Dynamics and Simulation, Systems Science and Systems Engineering, Vehicle Dynamic Performance Simulation, Virtual-tech Based System & Process-simulation, etc.