PRODUCTION AND RESEARCH OF TABLETS OF MIXED URANIUM, PLUTONIUM, AMERICIUM AND NEPTUNIUM NITRIDES

Q Chemical Engineering
M. A. Kuzin, S. Abramov, O. N. Nikitin, S. V. Kuz’min, A. Grachev, A. Zherebtsov, L. M. Zabud‘ko
{"title":"PRODUCTION AND RESEARCH OF TABLETS OF MIXED URANIUM, PLUTONIUM, AMERICIUM AND NEPTUNIUM NITRIDES","authors":"M. A. Kuzin, S. Abramov, O. N. Nikitin, S. V. Kuz’min, A. Grachev, A. Zherebtsov, L. M. Zabud‘ko","doi":"10.31044/1684-5811-2021-22-1-36-43","DOIUrl":null,"url":null,"abstract":"The method of carbothermic synthesis produced 260 g tablets of mixed nitrides of uranium, plutonium, americium and neptunium with a mass fraction of americium 0.61%. For the production of tablets were used uranium oxide manufactured by the water method, as well as plutonium dioxide containing impurities of uranium and americium oxides with a mass of 0.9 g americium, obtained by volumetric crystallization method in a NaCl — 2CsCl melt. Neptunium dioxide and americium oxide were added to the mixture of uranium and plutonium oxides before carbothermic synthesis. The resulting tablets had a density of 11.6-11.9 g / cm3. By methods of gamma-spectrometry, scanning electron microscopy and x-ray microanalysis is showed that the heat treatment of the mixture of the source chemicals - oxides of uranium, plutonium, americium, neptunium with carbon black at a temperature 1600-1500 °C for 72 h (24 h in nitrogen and 48 h in nitrogen-hydrogen atmospheres), and also the subsequent sintering synthesized by the press powders for 48 h at a temperature of 1800°C in nitrogen-hydrogen atmosphere doesn't leads in average to the significant losses of americium.","PeriodicalId":9863,"journal":{"name":"Chemical Engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31044/1684-5811-2021-22-1-36-43","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q","JCRName":"Chemical Engineering","Score":null,"Total":0}
引用次数: 1

Abstract

The method of carbothermic synthesis produced 260 g tablets of mixed nitrides of uranium, plutonium, americium and neptunium with a mass fraction of americium 0.61%. For the production of tablets were used uranium oxide manufactured by the water method, as well as plutonium dioxide containing impurities of uranium and americium oxides with a mass of 0.9 g americium, obtained by volumetric crystallization method in a NaCl — 2CsCl melt. Neptunium dioxide and americium oxide were added to the mixture of uranium and plutonium oxides before carbothermic synthesis. The resulting tablets had a density of 11.6-11.9 g / cm3. By methods of gamma-spectrometry, scanning electron microscopy and x-ray microanalysis is showed that the heat treatment of the mixture of the source chemicals - oxides of uranium, plutonium, americium, neptunium with carbon black at a temperature 1600-1500 °C for 72 h (24 h in nitrogen and 48 h in nitrogen-hydrogen atmospheres), and also the subsequent sintering synthesized by the press powders for 48 h at a temperature of 1800°C in nitrogen-hydrogen atmosphere doesn't leads in average to the significant losses of americium.
铀、钚、镅、氮化镎混合片剂的生产与研究
采用碳热合成法制备了质量分数为0.61%的铀、钚、镅、镎混合氮化物片260 g。片剂采用水法生产的氧化铀,以及在NaCl - 2CsCl熔体中体积结晶法得到的含有铀和镅氧化物杂质的二氧化钚,其质量为0.9 g。在碳热合成之前,在铀和钚的氧化物混合物中加入了二氧化镎和氧化镅。所得片剂密度为11.6 ~ 11.9 g / cm3。通过伽玛能谱法、扫描电镜和x射线显微分析表明,源化学物质铀、钚、镅、镎的氧化物与炭黑的混合物在1600-1500℃的温度下热处理72小时(在氮气中24小时,在氮氢混合气氛中48小时),用压粉在1800℃的氮气-氢气气氛下烧结48 h,平均不会导致镅的明显损失。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Chemical Engineering
Chemical Engineering 工程技术-工程:化工
CiteScore
0.06
自引率
0.00%
发文量
0
审稿时长
6-12 weeks
期刊介绍: Chemical Engineering is published monthly by Access Intelligence, primarily for chemical engineers and related technical people in the chemical process industries (CPI), as well as at engineering, design and construction companies that serve the CPI. The CPI consist of: chemicals, including petrochemicals; drugs and cosmetics; explosives and ammunition; fats and oils; fertilizers and agricultural chemicals; foods and beverages; leather tanning and finishing; lime and cement; synthetic fibers; metallurgical and metal products; paints and coatings; petroleum refining and coal products; plastics; rubber; soap and detergents; stone, clay, glass and ceramics; wood, pulp, paper and board; other chemically processed products.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信