The Dynamic Simulation of Rotary Inertia on Light vehicle-Slope I

Q3 Engineering

Journal of Mechanical Engineering Research and Developments Pub Date : 2020-06-24 DOI:10.30564/jmer.v3i2.1800

Run Xu, Boyong Hur

引用次数: 0

Abstract

Article history Received: 13 April 2020 Accepted: 22 April 2020 Published Online: 30 April 2020 According to formula we can simulate their driven force and acceleration on the slope. The mechanical formula is used to obtain force and theoretical dynamics in the slope. The driven force decreases when rotation increases. When power increases the acceleration increases. it reduces when its weight raises. It is found that the a will decrease as slope becomes high from 5 to 11° to 22°, which fit the formula too. Meantime as the radius is high from 0.3m to 0.4m to 0.47m a will be low. The needed force will increase as the slope decline becomes big at the same power.

查看原文本刊更多论文

轻型车辆旋转惯量的动力学模拟-斜坡[j]

文章历史收稿日期:2020年4月13日接收日期:2020年4月22日发布日期:2020年4月30日根据公式我们可以模拟出它们在斜坡上的驱动力和加速度。利用力学公式求得边坡的受力和理论动力学。随着旋转的增加，驱动力减小。当功率增加时，加速度也随之增加。当它的重量增加时，它会减少。从5°到11°，再到22°，随着坡度的增大，a值逐渐减小，符合公式。同时，当半径从0.3m到0.4m到0.47m时，a会变小。在相同的功率下，所需的力随着坡度的减小而增大。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Mechanical Engineering Research and Developments Engineering-Computational Mechanics

自引率

0.00%

发文量

审稿时长

9 weeks

期刊介绍： The scopes of the journal include, but are not limited to, the following topics: • Thermal Engineering and Fluids Engineering • Mechanics • Kinematics, Dynamics, & Control of Mechanical Systems • Mechatronics, Robotics and Automation • Design, Manufacturing, & Product Development • Human and Machine Haptics Specific topics of interest include: Advanced Manufacturing Technology, Analysis and Decision of Industry & Manufacturing System, Applied Mechanics, Biomechanics, CAD/CAM Integration Technology, Complex Curve Design, Manufacturing & Application, Computational Mechanics, Computer-aided Geometric Design & Simulation, Fluid Dynamics, Fluid Mechanics, General mechanics, Geomechanics, Industrial Application of CAD, Machinery and Machine Design, Machine Vision and Learning, Material Science and Processing, Mechanical Power Engineering, Mechatronics and Robotics, Artificial Intelligence, PC Guided Design and Manufacture, Precision Manufacturing & Measurement, Precision Mechanics, Production Technology, Quality & Reliability Engineering, Renewable Energy Technologies, Science and Engineering Computing, Solid Mechanics, Structural Dynamics, System Dynamics and Simulation, Systems Science and Systems Engineering, Vehicle Dynamic Performance Simulation, Virtual-tech Based System & Process-simulation, etc.