Mechanical properties and bearing capacity of CFRP confined steel reinforced recycled concrete columns under axial compression loading

Abstract

To study the axial compression behavior of carbon fiber reinforced plastics (CFRP) confined steel reinforced recycled concrete (CSRRC) columns, 11 specimens of CSRRC columns were manufactured and tested under axial compression loading. The design variables in the experiments included the replacement percentage of recycled coarse aggregate (RCA), layers of CFRP, strength of recycled aggregate concrete (RAC), profile steel ratio and slenderness ratio. Subsequently, the failure process and modes, load-displacement curves, stress-strain curves, transverse deformation coefficient and stiffness degradation of the specimens were obtained and analyzed in detail. The experimental results showed that the profile steel yielded before the steel rebars in the columns, then the RAC was crushed, and finally the CFRP broke under axial compression loading. The axial bearing capacity of CSRRC columns decreased with the increase of replacement percentage of RCA and slenderness ratio, respectively. However, the CFRP can give full play to its high-strength confinement performance and effectively improve the axial bearing capacity and deformability of columns. Moreover, the profile steel ratio and strength of RAC have significant effects on the initial stiffness of CSRRC columns, and the stiffness degradation rate of columns decreases with the increase of these parameters. Overall, the CSRRC columns exhibit high axial bearing capacity and good ductility deformation ability. Based on ACI 440.2R-08, the modified formula on the nominal axial bearing capacity of CSRRC columns was proposed in this study. The accuracy on the modified formulae was evaluated by the comparison between the calculated values and test values.