{"title":"Initial Study on Metal Dusting Behavior of Fe–Cr and Fe–Ni-Cr Alloys Under a Simulated Blast Furnace Operating Condition","authors":"Tatsuya Murakami, Thuan Dinh Nguyen, Xuteng Xi, Jianqiang Zhang","doi":"10.1007/s11085-023-10176-0","DOIUrl":null,"url":null,"abstract":"<div><p>Blast furnace ironmaking produces a reducing and carburizing atmosphere in the blast furnace which may lead to metal dusting. However, there is limited research on metal dusting under this particular atmosphere. This paper investigated metal dusting behaviors of ferritic Fe-(10, 20, 25)Cr and austenitic Fe-20Cr-(20, 33)Ni, Fe-25Cr-20Ni (wt.%) alloys at 550 and 650 °C in an Ar-33CO-7H<sub>2</sub>-7CO<sub>2</sub>-2H<sub>2</sub>O (vol.%) gas simulating a blast furnace operating condition. A relatively short reaction time, up to 100 h, was used to evaluate the initial stage of metal dusting of these alloys in the blast furnace gas condition. Severe metal dusting and coke deposition were observed at 550 °C, while no significant dusting but internal oxidation and carburization were observed at 650 °C. Higher Cr and Ni contents in the alloy lowered kinetics of metal dusting at 550 °C and of carburization at both temperatures. Austenitic alloys were more susceptible to metal dusting and coke deposition than ferritic alloys with the same Cr content at 550 °C. At 650 °C, however, ferritic alloys experienced higher extents of carburization and oxidation than austenitic alloys with the same Cr concentration. The effects of alloy composition and reaction temperature on metal dusting in this simulated blast furnace operating condition were discussed. </p></div>","PeriodicalId":724,"journal":{"name":"Oxidation of Metals","volume":null,"pages":null},"PeriodicalIF":2.1000,"publicationDate":"2023-08-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11085-023-10176-0.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Oxidation of Metals","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11085-023-10176-0","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0
Abstract
Blast furnace ironmaking produces a reducing and carburizing atmosphere in the blast furnace which may lead to metal dusting. However, there is limited research on metal dusting under this particular atmosphere. This paper investigated metal dusting behaviors of ferritic Fe-(10, 20, 25)Cr and austenitic Fe-20Cr-(20, 33)Ni, Fe-25Cr-20Ni (wt.%) alloys at 550 and 650 °C in an Ar-33CO-7H2-7CO2-2H2O (vol.%) gas simulating a blast furnace operating condition. A relatively short reaction time, up to 100 h, was used to evaluate the initial stage of metal dusting of these alloys in the blast furnace gas condition. Severe metal dusting and coke deposition were observed at 550 °C, while no significant dusting but internal oxidation and carburization were observed at 650 °C. Higher Cr and Ni contents in the alloy lowered kinetics of metal dusting at 550 °C and of carburization at both temperatures. Austenitic alloys were more susceptible to metal dusting and coke deposition than ferritic alloys with the same Cr content at 550 °C. At 650 °C, however, ferritic alloys experienced higher extents of carburization and oxidation than austenitic alloys with the same Cr concentration. The effects of alloy composition and reaction temperature on metal dusting in this simulated blast furnace operating condition were discussed.
期刊介绍:
Oxidation of Metals is the premier source for the rapid dissemination of current research on all aspects of the science of gas-solid reactions at temperatures greater than about 400˚C, with primary focus on the high-temperature corrosion of bulk and coated systems. This authoritative bi-monthly publishes original scientific papers on kinetics, mechanisms, studies of scales from structural and morphological viewpoints, transport properties in scales, phase-boundary reactions, and much more. Articles may discuss both theoretical and experimental work related to gas-solid reactions at the surface or near-surface of a material exposed to elevated temperatures, including reactions with oxygen, nitrogen, sulfur, carbon and halogens. In addition, Oxidation of Metals publishes the results of frontier research concerned with deposit-induced attack. Review papers and short technical notes are encouraged.