Finite element modeling of the distribution of hydrogen atoms at a dent on pipelines for hydrogen transport under cyclic loading

Abstract

Repurposing existing natural gas pipelines for hydrogen transport requires an accurate assessment of the distribution of hydrogen (H) atoms at defects, such as dents, under frequent pressure fluctuations experienced by gas pipelines. In this work, a 3-dimensional finite element-based model was developed to determine the stress/strain and H atom concentrations at an unconstrained dent on an X52 steel pipe which experienced denting, spring-back and cyclic loading processes. As expected, stress and strain concentrations generate at the dent center. However, the cyclic loading reduces the stress level and shifts the stress concentration zone from the dent center along the circumferential direction. As the dent depth increases, the maximum H atom concentration is further shifted from the dent center to the side. There are no certain relationships among the maximum H atom concentration, von Mises stress, hydrostatic stress, and plastic strain in terms of their distributions and quantities. Pressure fluctuations decrease both the stress and H atom concentrations at the dent, providing a beneficial effect on reduced risk of the dented pipelines to hydrogen embrittlement in high-pressure hydrogen gas environments. The indenter size has little influence on the H atom distribution in the dent area.