{"title":"Influence of HIP sintering technique on the reliability of the mechanical properties of brass-an experimental study.","authors":"S. Alnomani","doi":"10.29354/diag/154830","DOIUrl":null,"url":null,"abstract":"The reliability of the mechanical properties of any product plays an important role in the longevity of the product to work properly under various working conditions. In the present study, the effect of preparing brass alloy on its mechanical properties was experimentally studied. Samples of brass (60% Cu-40% Zn) were prepared by hot iso-stating pressing (HIP) sintering method and some main mechanical tests were performed on them included porosity, density, hardness and compression tests. Results of these tests were compared with corresponding tests on commercial brass alloys produced by casting in order to show the effect of the method of preparing on their mechanical properties. There was a significant improvement in the hardness and strength of the sintered alloy due to the increasing in density and decreasing in porosity comparing with the corresponding other casting's alloys. Results showed an improvement in the density values by 8.4% as a result of the significant reduction in the porosity values from 8.65% to about 0.43%. As a result, the strength of the alloys prepared by the heat pressing method has jumped to a value of 600MPa compared to the traditional castings that have a strength of 343MPa.","PeriodicalId":52164,"journal":{"name":"Diagnostyka","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Diagnostyka","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.29354/diag/154830","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0
Abstract
The reliability of the mechanical properties of any product plays an important role in the longevity of the product to work properly under various working conditions. In the present study, the effect of preparing brass alloy on its mechanical properties was experimentally studied. Samples of brass (60% Cu-40% Zn) were prepared by hot iso-stating pressing (HIP) sintering method and some main mechanical tests were performed on them included porosity, density, hardness and compression tests. Results of these tests were compared with corresponding tests on commercial brass alloys produced by casting in order to show the effect of the method of preparing on their mechanical properties. There was a significant improvement in the hardness and strength of the sintered alloy due to the increasing in density and decreasing in porosity comparing with the corresponding other casting's alloys. Results showed an improvement in the density values by 8.4% as a result of the significant reduction in the porosity values from 8.65% to about 0.43%. As a result, the strength of the alloys prepared by the heat pressing method has jumped to a value of 600MPa compared to the traditional castings that have a strength of 343MPa.
期刊介绍:
Diagnostyka – is a quarterly published by the Polish Society of Technical Diagnostics (PSTD). The journal “Diagnostyka” was established by the decision of the Presidium of Main Board of the Polish Society of Technical Diagnostics on August, 21st 2000 and replaced published since 1990 reference book of the PSTD named “Diagnosta”. In the years 2000-2003 there were issued annually two numbers of the journal, since 2004 “Diagnostyka” is issued as a quarterly. Research areas covered include: -theory of the technical diagnostics, -experimental diagnostic research of processes, objects and systems, -analytical, symptom and simulation models of technical objects, -algorithms, methods and devices for diagnosing, prognosis and genesis of condition of technical objects, -methods for detection, localization and identification of damages of technical objects, -artificial intelligence in diagnostics, neural nets, fuzzy systems, genetic algorithms, expert systems, -application of technical diagnostics, -diagnostic issues in mechanical and civil engineering, -medical and biological diagnostics with signal processing application, -structural health monitoring, -machines, -noise and vibration, -analysis of technical and civil systems.