Low-cycle fatigue behavior of solutionized and aged WE43 magnesium alloys at room temperature

IF 15.8 1区 材料科学 Q1 METALLURGY & METALLURGICAL ENGINEERING
{"title":"Low-cycle fatigue behavior of solutionized and aged WE43 magnesium alloys at room temperature","authors":"","doi":"10.1016/j.jma.2022.09.026","DOIUrl":null,"url":null,"abstract":"<div><p>The low-cycle fatigue behavior of solutionized (T4) and aged (T6) WE43 magnesium alloys was studied at room temperature. The total strain amplitudes (Δε<sub>t</sub>/2) were 0.4%, 0.5%, 0.6%, 0.7% and 1.0%. Detailed microstructure evolution was characterized by scanning electron microscope (SEM), electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM). The results showed that plastic strain amplitude decreased with the increasing cycle number in T4 alloy, which is due to the dense persistent slip bands (PSBs) and dynamic precipitates hindering &lt;a&gt; dislocation slip. In contrast, the plastic strain amplitude increases gradually in T6 alloy, which is attributed to the enhanced activation of pyramidal slip. The low-cycle fatigue life of T6 alloy with larger fatigue ductility coefficient is longer than that of T4 alloy. The Coffin-Manson model can accurately predict the fatigue life of T4 and T6 alloys compared to Jahed-Varvani (JV) energy model. For T4 alloy, the fatigue damage mechanism was dominated by basal slip. For T6 alloy, the enhanced pyramidal slip plays an important role to accommodate plastic deformation.</p></div>","PeriodicalId":16214,"journal":{"name":"Journal of Magnesium and Alloys","volume":null,"pages":null},"PeriodicalIF":15.8000,"publicationDate":"2024-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2213956722002481/pdfft?md5=8f308b04a51005249f5f4cd0b7f59beb&pid=1-s2.0-S2213956722002481-main.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Magnesium and Alloys","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2213956722002481","RegionNum":1,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

The low-cycle fatigue behavior of solutionized (T4) and aged (T6) WE43 magnesium alloys was studied at room temperature. The total strain amplitudes (Δεt/2) were 0.4%, 0.5%, 0.6%, 0.7% and 1.0%. Detailed microstructure evolution was characterized by scanning electron microscope (SEM), electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM). The results showed that plastic strain amplitude decreased with the increasing cycle number in T4 alloy, which is due to the dense persistent slip bands (PSBs) and dynamic precipitates hindering <a> dislocation slip. In contrast, the plastic strain amplitude increases gradually in T6 alloy, which is attributed to the enhanced activation of pyramidal slip. The low-cycle fatigue life of T6 alloy with larger fatigue ductility coefficient is longer than that of T4 alloy. The Coffin-Manson model can accurately predict the fatigue life of T4 and T6 alloys compared to Jahed-Varvani (JV) energy model. For T4 alloy, the fatigue damage mechanism was dominated by basal slip. For T6 alloy, the enhanced pyramidal slip plays an important role to accommodate plastic deformation.

室温下固溶时效WE43镁合金的低周疲劳行为
研究了室温下固溶(T4)和老化(T6)WE43 镁合金的低循环疲劳行为。总应变振幅(Δεt/2)分别为 0.4%、0.5%、0.6%、0.7% 和 1.0%。通过扫描电子显微镜(SEM)、电子反向散射衍射(EBSD)和透射电子显微镜(TEM)对微观结构演变进行了详细表征。结果表明,T4 合金的塑性应变振幅随着循环次数的增加而减小,这是由于致密的持久滑移带(PSB)和动态沉淀阻碍了位错滑移。相反,T6 合金的塑性应变振幅逐渐增大,这是由于金字塔形滑移的激活作用增强所致。疲劳延性系数较大的 T6 合金的低循环疲劳寿命比 T4 合金长。与 Jahed-Varvani(JV)能量模型相比,Coffin-Manson 模型能准确预测 T4 和 T6 合金的疲劳寿命。对于 T4 合金,疲劳损伤机制主要是基底滑移。对于 T6 合金,增强的金字塔滑移在适应塑性变形方面发挥了重要作用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Journal of Magnesium and Alloys
Journal of Magnesium and Alloys Engineering-Mechanics of Materials
CiteScore
20.20
自引率
14.80%
发文量
52
审稿时长
59 days
期刊介绍: The Journal of Magnesium and Alloys serves as a global platform for both theoretical and experimental studies in magnesium science and engineering. It welcomes submissions investigating various scientific and engineering factors impacting the metallurgy, processing, microstructure, properties, and applications of magnesium and alloys. The journal covers all aspects of magnesium and alloy research, including raw materials, alloy casting, extrusion and deformation, corrosion and surface treatment, joining and machining, simulation and modeling, microstructure evolution and mechanical properties, new alloy development, magnesium-based composites, bio-materials and energy materials, applications, and recycling.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信