Development and validation of RP HPLC method for the estimation of methyl paraben sodium and propyl paraben sodium in iron protein succinylate syrup

Abstract

A new precise, selective and reliable reversed phase high performance liquid chromatographic (RP-HPLC) method has been developed and validated for the determination of Methyl paraben sodium (MPS) and Propyl paraben sodium (PPS) (preservatives) in Iron protein succinylate syrup. Optimized conditions were; Methanol: Water (65: 35) as mobile phase, UV/Vis detector at the wavelength of 254 nm and flow rate was set at 1.3 ml min−1. By applying the set of conditions, separation of components was carried out in less than 7 min for both the analytes. The method was validated according to International conference of Harmonization (ICH) guidelines and the analytical characteristic parameters of validation included specificity, limit of detection (LOD), limit of quantification, linearity, accuracy, precision and robustness were evaluated. The calibration curve was found to be linear in the range of 0.045 mg mL−1 to 0.075 mg mL−1 for Methyl paraben sodium and 0.015 mg mL−1 to 0.025 mg mL−1 for propyl paraben sodium with a correlation coefficient r2 > 0.999. Accuracy; reported as percentage recovery was found to be in the range of 98.71%–101.64% for Methyl paraben sodium and 99.85%–101.47% for Propyl paraben sodium at 80%, 100% and 120% concentration for both the analytes. The proposed method was found to be precise and robust when evaluated by variations in wavelength, mobile phase composition, temperature and analyst. The limit of detection (LOD) was found 0.001 mg mL−1 (3 ppm) for Methyl paraben sodium and 0.001 mg mL−1 (1 ppm) for Propyl paraben sodium.