Corrosion Behavior of Reinforcing Steel in Concrete Elements in Alkaline Medium

Abstract

Corrosion of steel in reinforcement concrete is complex. When chloride ions and oxygen reach reinforcing steel, corrosion is initiated. The deterioration process starts with expansions of the bare steel substrate then after cracks in the concrete are developed. The aim of this work is to determine firstly, through the electrochemical technic, the critical concentration of chloride ions which are responsible for the initiation of the dissolution step. Then, the effect of the external parameters on the rate of penetration of the chloride ions into the concrete are also evaluated. For this propose, the electrochemical behavior of the steel of construction “E24” is studied in carbonate medium without and with different concentrations of chloride ions. The effect of various parameters such as temperature, ions concentration and solution pH was also evaluated through the evolution of the open circuit potential, d.c polarization measurement and electrochemical impedance spectroscopy. The d.c polarization and EIS results shows that the addition of 0.5M CaCl2 (as critical concentration) to the saturated Ca(OH)2 solution, brings to a rapid and a continuous dissolution of the substrate where after 3 hours of immersion time the whole surface of the substrate was covered the corrosion products. This is may be due to specific adsorption of Cl-.