Low Sidelobe Level Pattern Synthesis of 2-D Slot Array Antenna Based on Ridged Waveguide

IF 0.9 4区 工程技术 Q4 COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS
Mostafa Sadeghzadeh, Alireza Mallahzadeh, Gholamreza Dadashzadeh
{"title":"Low Sidelobe Level Pattern Synthesis of 2-D Slot Array Antenna Based on Ridged Waveguide","authors":"Mostafa Sadeghzadeh,&nbsp;Alireza Mallahzadeh,&nbsp;Gholamreza Dadashzadeh","doi":"10.1155/2023/8770401","DOIUrl":null,"url":null,"abstract":"<div>\n <p>Slotted waveguide antennas have received much attention due to features such as low loss, high efficiency, and high power capacity. In this article, a 2-D slot array antenna based on a ridged waveguide with a low level of side lobe is synthesized. The antenna consists of four slotted ridged waveguides, each of which consists of eight slots as the radiating elements. A fast and easy way is proposed to synthesize the aperture distribution in the H-plane. Further, a corporate feed network based on ridged waveguide is designed to feed the antenna. The feed network is designed such that the desired aperture distribution in the E-plane is achieved. A prototype of the antenna is fabricated and measured. The measured sidelobe levels in the H- and E-planes are, respectively, -24.5 dB and -23.9 dB, and the reflection coefficient of the antenna is -19 dB at the design frequency, indicating the accuracy of the design procedure. The measured antenna gain is approximately 20.4 dBi at the entire frequency band. The stable radiation pattern of the antenna makes the antenna suitable for radar applications.</p>\n </div>","PeriodicalId":54944,"journal":{"name":"International Journal of RF and Microwave Computer-Aided Engineering","volume":"2023 1","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2023-05-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://onlinelibrary.wiley.com/doi/epdf/10.1155/2023/8770401","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of RF and Microwave Computer-Aided Engineering","FirstCategoryId":"5","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1155/2023/8770401","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS","Score":null,"Total":0}
引用次数: 0

Abstract

Slotted waveguide antennas have received much attention due to features such as low loss, high efficiency, and high power capacity. In this article, a 2-D slot array antenna based on a ridged waveguide with a low level of side lobe is synthesized. The antenna consists of four slotted ridged waveguides, each of which consists of eight slots as the radiating elements. A fast and easy way is proposed to synthesize the aperture distribution in the H-plane. Further, a corporate feed network based on ridged waveguide is designed to feed the antenna. The feed network is designed such that the desired aperture distribution in the E-plane is achieved. A prototype of the antenna is fabricated and measured. The measured sidelobe levels in the H- and E-planes are, respectively, -24.5 dB and -23.9 dB, and the reflection coefficient of the antenna is -19 dB at the design frequency, indicating the accuracy of the design procedure. The measured antenna gain is approximately 20.4 dBi at the entire frequency band. The stable radiation pattern of the antenna makes the antenna suitable for radar applications.

Abstract Image

基于脊波导的二维缝隙阵列天线低旁瓣方向图合成
开槽波导天线以其低损耗、高效率、高容量等特点受到了广泛的关注。本文合成了一种基于低旁瓣脊波导的二维缝隙阵列天线。天线由四个开槽脊波导组成,每个开槽脊波导由八个狭槽作为辐射元件组成。提出了一种快速简便的合成h平面孔径分布的方法。进一步,设计了基于脊状波导的公司馈电网络来馈电天线。该馈电网络的设计使e平面上的孔径分布达到了要求。制作了天线样机并进行了测量。测得的H面和e面旁瓣电平分别为-24.5 dB和-23.9 dB,天线在设计频率下的反射系数为-19 dB,表明设计方法的准确性。测量到的天线增益在整个频段约为20.4 dBi。该天线具有稳定的辐射方向图,适合雷达应用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
4.00
自引率
23.50%
发文量
489
审稿时长
3 months
期刊介绍: International Journal of RF and Microwave Computer-Aided Engineering provides a common forum for the dissemination of research and development results in the areas of computer-aided design and engineering of RF, microwave, and millimeter-wave components, circuits, subsystems, and antennas. The journal is intended to be a single source of valuable information for all engineers and technicians, RF/microwave/mm-wave CAD tool vendors, researchers in industry, government and academia, professors and students, and systems engineers involved in RF/microwave/mm-wave technology. Multidisciplinary in scope, the journal publishes peer-reviewed articles and short papers on topics that include, but are not limited to. . . -Computer-Aided Modeling -Computer-Aided Analysis -Computer-Aided Optimization -Software and Manufacturing Techniques -Computer-Aided Measurements -Measurements Interfaced with CAD Systems In addition, the scope of the journal includes features such as software reviews, RF/microwave/mm-wave CAD related news, including brief reviews of CAD papers published elsewhere and a "Letters to the Editor" section.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信