On the sudden reversal of soot formation by oxygen addition in DME flames

Abstract

Dimethyl ether (DME) is a non-toxic and renewable fuel known for its soot emissions reduction tendencies. In laminar co-flow DME diffusion flames, adding oxygen to the fuel stream increases the sooting tendency until a critical point is reached, at which point the trend suddenly reverses. This work unravels the mechanisms behind this reversal process, and characterizes their contribution to controlling soot production. A series of experimental measurements using diffuse-light line-of-sight attenuation and two-colour pyrometry were performed to measure soot volume fraction and soot temperature considering a fixed mass flow rate of DME and variable addition of oxygen. Soot volume fraction increases from 0.095 ppm in the pure DME flame to 0.32 ppm when the added oxygen concentration reaches 33%. When the oxygen concentration is slightly increased to 35%, soot volume fraction is reduced by 60%. To explain the reasons behind the reversal, a series of numerical simulations were performed, which successfully demonstrated the same trend. Results show that the chemical effects of adding oxygen to the fuel stream are exceedingly more important than the thermal and dilution effects. It was found that the reversal occurred when nearly all DME disassociated before exiting the fuel tube, indicating a sudden transition from a partially premixed DME flame, to one which primarily burns C1 fuel fragments. An analysis of soot formation and oxidation rates showed that near the reversal, soot inception is the least affected process; furthermore, soot precursor availability is not significantly affected in magnitude, rather they appear further upstream. It is concluded that the favourable conditions for rapid DME decomposition into soot precursors enhances soot inception while depleting the necessary species for further soot mass growth, dramatically reducing soot concentration.