Nonlinear free vibration of magneto–electro–elastic sandwich plates with auxetic cores under coupled thermo–electro–magnetic fields

IF 4 3区 工程技术 Q2 MECHANICS
Ismail Esen, Seyit Ali Kara
{"title":"Nonlinear free vibration of magneto–electro–elastic sandwich plates with auxetic cores under coupled thermo–electro–magnetic fields","authors":"Ismail Esen,&nbsp;Seyit Ali Kara","doi":"10.1007/s00707-026-04763-w","DOIUrl":null,"url":null,"abstract":"<div><p>This study presents a comprehensive nonlinear vibration analysis of magneto–electro–elastic (MEE) sandwich plates incorporating auxetic core architectures under coupled thermo–electro–magnetic fields. A semi-analytical formulation based on higher-order shear deformation theory (HSDT) and nonlocal strain-gradient theory is developed to capture geometric nonlinearity, size dependency, and multi-field coupling effects. Finite element analysis is employed only at the unit-cell level to homogenize the effective elastic properties of the anti-tetrachiral auxetic core. The results reveal that increasing the auxetic core thickness ratio leads to a reduction of the fundamental normalized frequency by approximately 15–35%, depending on the geometric configuration, due to enhanced internal rotational mechanisms and reduced effective bending stiffness. Thermal loading is found to have a dominant influence on the dynamic response, causing a continuous decrease in frequency and leading to a critical minimum at Δ<i>T</i> ≈ 2000 K, where the frequency drops by nearly 40–60% compared to the initial state. This temperature level may be interpreted as a critical-like thermally dominated transition region, where thermally induced compressive stresses strongly reduce the effective tangent stiffness; beyond this region, geometric nonlinearity contributes to a partial stiffness recovery. Furthermore, the material length-scale parameter significantly enhances stiffness at small scales, increasing the frequency by up to 20% in the low-temperature regime, while its influence diminishes near the frequency-minimum temperature. The applied magnetic potential exhibits a stabilizing effect, increasing the frequency by approximately 10–25%, whereas the electric potential induces a softening behavior and shifts the frequency-minimum temperature to lower values, accelerating instability. In addition, the incorporation of an elastic foundation is shown to significantly improve structural stability, with increasing foundation stiffness suppressing thermal softening and delaying the onset of instability. Overall, the study demonstrates that the nonlinear vibration behavior of auxetic-core MEE sandwich plates is governed by a strong competition between thermal softening and multi-field-induced stiffness modulation. The findings provide new physical insight and practical guidelines for the design of advanced smart structures operating under severe multi-field environments.</p></div>","PeriodicalId":456,"journal":{"name":"Acta Mechanica","volume":"237 9","pages":"5021 - 5054"},"PeriodicalIF":4.0000,"publicationDate":"2026-06-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s00707-026-04763-w.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Mechanica","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s00707-026-04763-w","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

This study presents a comprehensive nonlinear vibration analysis of magneto–electro–elastic (MEE) sandwich plates incorporating auxetic core architectures under coupled thermo–electro–magnetic fields. A semi-analytical formulation based on higher-order shear deformation theory (HSDT) and nonlocal strain-gradient theory is developed to capture geometric nonlinearity, size dependency, and multi-field coupling effects. Finite element analysis is employed only at the unit-cell level to homogenize the effective elastic properties of the anti-tetrachiral auxetic core. The results reveal that increasing the auxetic core thickness ratio leads to a reduction of the fundamental normalized frequency by approximately 15–35%, depending on the geometric configuration, due to enhanced internal rotational mechanisms and reduced effective bending stiffness. Thermal loading is found to have a dominant influence on the dynamic response, causing a continuous decrease in frequency and leading to a critical minimum at ΔT ≈ 2000 K, where the frequency drops by nearly 40–60% compared to the initial state. This temperature level may be interpreted as a critical-like thermally dominated transition region, where thermally induced compressive stresses strongly reduce the effective tangent stiffness; beyond this region, geometric nonlinearity contributes to a partial stiffness recovery. Furthermore, the material length-scale parameter significantly enhances stiffness at small scales, increasing the frequency by up to 20% in the low-temperature regime, while its influence diminishes near the frequency-minimum temperature. The applied magnetic potential exhibits a stabilizing effect, increasing the frequency by approximately 10–25%, whereas the electric potential induces a softening behavior and shifts the frequency-minimum temperature to lower values, accelerating instability. In addition, the incorporation of an elastic foundation is shown to significantly improve structural stability, with increasing foundation stiffness suppressing thermal softening and delaying the onset of instability. Overall, the study demonstrates that the nonlinear vibration behavior of auxetic-core MEE sandwich plates is governed by a strong competition between thermal softening and multi-field-induced stiffness modulation. The findings provide new physical insight and practical guidelines for the design of advanced smart structures operating under severe multi-field environments.

热-电磁场耦合作用下磁-电弹性夹层板的非线性自由振动
本文研究了在热-电磁场耦合作用下,磁-电弹性(MEE)夹层板的非线性振动问题。基于高阶剪切变形理论(HSDT)和非局部应变梯度理论,提出了一种描述几何非线性、尺寸依赖性和多场耦合效应的半解析公式。有限元分析仅在单元水平上用于均匀化抗四手性增材芯的有效弹性性能。结果表明,由于增强了内部旋转机制和降低了有效弯曲刚度,根据几何结构的不同,增加辅心厚度比可导致基本归一化频率降低约15-35%。研究发现,热载荷对动态响应有主要影响,导致频率持续下降,并在ΔT≈2000 K处达到临界最小值,与初始状态相比,频率下降了近40-60%。这个温度水平可以解释为一个类似临界的热主导过渡区,在这个过渡区,热诱导的压缩应力强烈地降低了有效切线刚度;在此区域之外,几何非线性有助于部分刚度恢复。此外,材料长度尺度参数在小尺度下显著提高了刚度,在低温状态下将频率提高了20%,而在频率最低温度附近,其影响减弱。外加磁势表现出稳定效应,使频率增加了约10-25%,而电势则诱发了软化行为,使最低频率温度降至更低的值,加速了不稳定性。此外,弹性基础的加入可以显著提高结构稳定性,增加基础刚度可以抑制热软化并延迟失稳的发生。综上所述,该研究表明,热软化和多场诱导刚度调制之间的激烈竞争决定了异质芯MEE夹层板的非线性振动行为。这些发现为设计在恶劣多场环境下运行的先进智能结构提供了新的物理见解和实用指南。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Acta Mechanica
Acta Mechanica 物理-力学
CiteScore
4.30
自引率
14.80%
发文量
292
审稿时长
6.9 months
期刊介绍: Since 1965, the international journal Acta Mechanica has been among the leading journals in the field of theoretical and applied mechanics. In addition to the classical fields such as elasticity, plasticity, vibrations, rigid body dynamics, hydrodynamics, and gasdynamics, it also gives special attention to recently developed areas such as non-Newtonian fluid dynamics, micro/nano mechanics, smart materials and structures, and issues at the interface of mechanics and materials. The journal further publishes papers in such related fields as rheology, thermodynamics, and electromagnetic interactions with fluids and solids. In addition, articles in applied mathematics dealing with significant mechanics problems are also welcome.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书