Determination of the Stress–Strain State of a Composite Structure Made from an Organosilicon Matrix Using 3D Printing Technology

IF 0.58 Q4 Materials Science

Polymer Science, Series D Pub Date : 2026-09-04 DOI:10.1134/S1995421226700486

I. A. Makagonov, E. S. Chaplina, T. A. Guzeva, G. V. Malysheva

引用次数: 0

Abstract

Thermodynamic composite material composition for the design and manufacture of a medical prosthesis was selected, taking into account biocompatibility and deformation–strength properties. Chalk was used as a filler, and an organosilicon polymer was used as a polymer matrix. A prosthesis model was developed, and the optimal ratio of its components was determined through calculations.

查看原文本刊更多论文

利用3D打印技术测定有机硅基体复合结构的应力-应变状态

考虑生物相容性和变形强度特性，选择了用于医用假体设计和制造的热力学复合材料组合。粉笔被用作填料，有机硅聚合物被用作聚合物基质。建立了假体模型，通过计算确定了其各组成部分的最佳配比。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Polymer Science, Series D Materials Science-Polymers and Plastics

CiteScore

0.80

自引率

0.00%

发文量

期刊介绍： Polymer Science, Series D publishes useful description of engineering developments that are related to the preparation and application of glues, compounds, sealing materials, and binding agents, articles on the adhesion theory, prediction of the strength of adhesive joints, methods for the control of their properties, synthesis, and methods of structural modeling of glued joints and constructions, original articles with new scientific results, analytical reviews of the modern state in the field.