Claire Atumanye, Simon Bbumba, Hakimu Nsubuga, Ivan Kiganda, Timothy Omara, Justus Kwetegyeka
{"title":"Eggshell-Activated Carbon from Water Hyacinths for Heavy Metal Removal from Wastewater: Isotherm and Kinetic Studies.","authors":"Claire Atumanye, Simon Bbumba, Hakimu Nsubuga, Ivan Kiganda, Timothy Omara, Justus Kwetegyeka","doi":"10.3390/jox16040126","DOIUrl":null,"url":null,"abstract":"<p><p>Heavy metals (HMs) such as copper (Cu), lead (Pb), cadmium (Cd), chromium (Cr) and zinc (Zn) from industrial activities are discharged into nearby water resources after treatment. In the present study, the potential of utilizing chemically activated carbon derived from water hyacinths as a sustainable and low-cost adsorbent for heavy metal removal from industrial wastewater from the Nakawa industrial area, Uganda was investigated. The measured physicochemical parameters of wastewater (temperature, pH, electrical conductivity, total dissolved solids, turbidity, dissolved oxygen, chlorides and total hardness) varied significantly among the three sampled sites (<i>p</i> < 0.05), except for pH. Similarly, the concentration of the HMs in the samples (0.54 ± 0.04 mg L<sup>-1</sup> for Cr to 93.54 ± 0.07 mg L<sup>-1</sup> for Pb) varied significantly between sites (<i>p</i> < 0.05), exceeding the maximum permissible limits of Cd, Pb, Cr, Cu and Zn specified in the National Environment Standards for Discharge of Effluent into Water or Land. The water hyacinth biomass was activated using eggshell powder and phosphoric acid, followed by thermal treatment. Characterization using Fourier-transform infrared spectroscopy and scanning electron microscopy confirmed that there was improvement in its surface functionality and porosity post activation. Batch adsorption experiments indicated that optimal removal of the HMs was achieved at pH 4-5, contact time of 90 min, and 1.0 g of adsorbent. Maximum adsorption capacities of Pb, Cd, Cu, Cr and Zn were in the range of 1.04-8.36 mg g<sup>-1</sup>. Under the optimized conditions, the eggshell-activated carbon derived from water hyacinths had removal efficiencies of 91.2 ± 9.1% (range: 71.3-100%). Adsorption occurred through both monolayer and multilayer coverage, as indicated by the experimental data which fitted well to the Freundlich isotherm (Cd<sup>2+</sup>, Pb<sup>2+</sup>, Zn<sup>2+</sup> and Cu<sup>2+</sup> ions) and Langmuir isotherm model (Cr<sup>3+</sup> ions). These results support the potential of water hyacinth-derived activated carbon as an ecofriendly alternative for treating low concentrations of these HMs in industrial wastewater.</p>","PeriodicalId":42356,"journal":{"name":"Journal of Xenobiotics","volume":"16 4","pages":""},"PeriodicalIF":4.6000,"publicationDate":"2026-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC13397911/pdf/","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Xenobiotics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/jox16040126","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"TOXICOLOGY","Score":null,"Total":0}
引用次数: 0
Abstract
Heavy metals (HMs) such as copper (Cu), lead (Pb), cadmium (Cd), chromium (Cr) and zinc (Zn) from industrial activities are discharged into nearby water resources after treatment. In the present study, the potential of utilizing chemically activated carbon derived from water hyacinths as a sustainable and low-cost adsorbent for heavy metal removal from industrial wastewater from the Nakawa industrial area, Uganda was investigated. The measured physicochemical parameters of wastewater (temperature, pH, electrical conductivity, total dissolved solids, turbidity, dissolved oxygen, chlorides and total hardness) varied significantly among the three sampled sites (p < 0.05), except for pH. Similarly, the concentration of the HMs in the samples (0.54 ± 0.04 mg L-1 for Cr to 93.54 ± 0.07 mg L-1 for Pb) varied significantly between sites (p < 0.05), exceeding the maximum permissible limits of Cd, Pb, Cr, Cu and Zn specified in the National Environment Standards for Discharge of Effluent into Water or Land. The water hyacinth biomass was activated using eggshell powder and phosphoric acid, followed by thermal treatment. Characterization using Fourier-transform infrared spectroscopy and scanning electron microscopy confirmed that there was improvement in its surface functionality and porosity post activation. Batch adsorption experiments indicated that optimal removal of the HMs was achieved at pH 4-5, contact time of 90 min, and 1.0 g of adsorbent. Maximum adsorption capacities of Pb, Cd, Cu, Cr and Zn were in the range of 1.04-8.36 mg g-1. Under the optimized conditions, the eggshell-activated carbon derived from water hyacinths had removal efficiencies of 91.2 ± 9.1% (range: 71.3-100%). Adsorption occurred through both monolayer and multilayer coverage, as indicated by the experimental data which fitted well to the Freundlich isotherm (Cd2+, Pb2+, Zn2+ and Cu2+ ions) and Langmuir isotherm model (Cr3+ ions). These results support the potential of water hyacinth-derived activated carbon as an ecofriendly alternative for treating low concentrations of these HMs in industrial wastewater.
期刊介绍:
The Journal of Xenobiotics publishes original studies concerning the beneficial (pharmacology) and detrimental effects (toxicology) of xenobiotics in all organisms. A xenobiotic (“stranger to life”) is defined as a chemical that is not usually found at significant concentrations or expected to reside for long periods in organisms. In addition to man-made chemicals, natural products could also be of interest if they have potent biological properties, special medicinal properties or that a given organism is at risk of exposure in the environment. Topics dealing with abiotic- and biotic-based transformations in various media (xenobiochemistry) and environmental toxicology are also of interest. Areas of interests include the identification of key physical and chemical properties of molecules that predict biological effects and persistence in the environment; the molecular mode of action of xenobiotics; biochemical and physiological interactions leading to change in organism health; pathophysiological interactions of natural and synthetic chemicals; development of biochemical indicators including new “-omics” approaches to identify biomarkers of exposure or effects for xenobiotics.