Evaporative Cooling of Concrete Pavers Incorporating Recycled, Bio-Based and Lightweight Materials: Influence of Capillary Absorption and Density.

Abstract

The urban heat island effect is strongly linked to the use of dense mineral pavements with high thermal inertia and lacking passive heat dissipation mechanisms. This article evaluates the potential of evaporatively cooled concrete pavers, based on capillary action and evaporation by incorporating recycled, bio-based, and lightweight materials to develop functional porosity. Ten paver formulations were developed using natural or recycled sand, hemp fibers and shives, and lightweight aggregates. Compressive strength, density, capillary absorption, and thermal behavior were characterized. Tests were conducted outdoors in full sunlight over 48 h in comparison with reference urban materials. The results show that capillary action alone is insufficient to induce effective cooling. The raw recycled sand formulation exhibits high capillary absorption but reaches maximum temperatures of 43-44 °C, which may be due to its low interconnected porosity that limits evaporation. Conversely, formulations incorporating bio-based materials or lightweight aggregates showed a more favorable balance between water availability, reduced density, and surface cooling performance. Hemp-based pavers reach maximum temperatures of 38-40 °C, while those incorporating expanded clay range between 37 and 39 °C, representing a reduction of 7 to 13 °C compared to bitumen and maintaining mechanical strengths suitable for pedestrian use. The results suggest that effective evaporative cooling is associated with sufficient capillary absorption, efficient water transfer toward the surface, and moderate density limiting heat storage. This study demonstrates that high capillary absorption alone does not ensure effective evaporative cooling. By systematically comparing recycled, bio-based and lightweight aggregates, the results reveal that evaporative cooling efficiency probably depends on the functional connectivity of the pore network and on a moderate material density limiting heat storage.